Measurements of Lippert Underchassis Double Bin Storage with Spare Tire Carrier

Question

Question:

What is the total distance of the mounting brackets outside to outside, end to end.

asked by: Brian H

0

Expert Reply:

The overall measurements of the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier # LC125460 is 99-1/2 inches long overall and 23 inches wide at the mounting brackets. The length at the mounting brackets is 78 inches. Please see attached photos.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Timbren Rear Suspension Enhancement part #TDR1500DQ is an excellent option for your 2012 Ram 1500 as long it is not a regular cab. If you do have a regular cab then you will want to use the Timbren Rear Suspension Enhancement System part…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 8

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 9

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 10

Hey Jeff, I would strongly recommend the SumoSpring kit part #SS96EV for your 2025 Nissan Frontier. This will give you the support you are looking for without causing the ride quality to be overly harsh which the Timbrens are known to do. Install is…

view full answer...

Answer 11

Hey David, I would test fit everything and see which orientation works best. With the spacer or without. Ideally when the kit is installed there will be 1 inch of space between the Timbren and the frame so whichever orientation gets closest to that…

view full answer...

Answer 12

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Measurements of Lippert Underchassis Double Bin Storage with Spare Tire Carrier

Product Page this Question was Asked From

Continue Researching