Solution for Install Bolts that Seem too Big to Install Draw Tite Hitch 24914

Question

Question:

Part 24914 came with bolts that do not fit the weld nuts of my 2015 Mazda 3 Hatchback...

asked by: Michael D

0

Expert Reply:

The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are too small. I checked your order notes and you're up north where the winters are pretty harsh too so that makes this even more likely.

What you'll need to do it clean the weld nuts out so that you can thread the included bolts.

I have included a few links on hitch installation tips, cleaning weld nuts, and a video on cleaning weld nuts for you.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We have not had a chance to install the #24914 trailer hitch on a Mazda 3, but there is a way to determine if you have enough room for the bike carriers. If you look at the attached directions and then look under your Mazda you can measure from the…

view full answer...

Answer 2

The Draw Tite hitch part #24914 that you referenced is a fit for your 2017 Mazda 3 hatchback with the appearance package.

view full answer...

Answer 3

There are two holes on the side of your frame underneath the tape of your 2019 Mazda 3. You might double check to make sure you checked the correct one as it's pretty easy to mistake the wrong one. I attached a picture that shows which slot to…

view full answer...

Answer 4

Since you do not want anything touching the paint of your vehicle the best option is going to be a hitch mounted option. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part #S64670. This…

view full answer...

Answer 5

All of the hitches made for your 2018 Mazda 3 Hatchback are rated the same, for 300-lbs of tongue weight (TW) and 2000-lbs towing capacity. But these are available in two receiver sizes, both 1-1/4-inch like #24914 from Draw-Tite and #C11377 from…

view full answer...

Answer 6

The hitch I recommend for your 2018 Mazda 3 for carrying a bike rack is the Draw Tite part #24914 because unlike the Curt hitch that fits your vehicle part #C11377 it does not require the use of a stabilizer strap when carrying a bike rack like you…

view full answer...

Answer 7

Yes, the Draw-Tite Sportframe Trailer Hitch Receiver #24914 for your 2018 Mazda 3 Hatchback is compatible with the Locking Anti-Rattle, Threaded Hitch Pin #S64029 that you would use to lock the Swagman XTC-2 #S64670 to your trailer hitch. If you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Solution for Install Bolts that Seem too Big to Install Draw Tite Hitch 24914

Featured Help Information

Miscellaneous Media

Continue Researching