Replacement Tie Down Engineering 81035 Trailer Hubs
Updated 08/10/2017 | Published 08/09/2017
Products Featured in This Question
Question:
I am looking for replacement hubs for my trailer. What I know about my current hubs is that they are Tie Down Engineering hubs part# 81035. 5 on 4.5 bolt pattern 1250 lbs 1inch axle. Can you provide a part number for a replacement with EZ lube? Thanks
asked by: Mack
Expert Reply:
Based on my research, the Tie Down Engineering 81035 hubs currently on your trailer use # L44643 inner and outer bearing.
For a compatible EZ Lube Hub for your trailer spindle, I recommend the etrailer.com Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-1K. This hub assembly is designed for 2,000 pound axles and has a 5 on 4-1/2 inch bolt pattern. It is compatible with 8 inch to 12 inch wheels and the bearings, races and seal are all included.
For a hub and drum assembly, you can use # AKHD-545-2-EZ-1K.
I have attached a couple of short video demonstrations on these products for you to check out.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12" - 5 on 4.5 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Finding Replacement Caliper Bolts For A Tie Down Engineering 46304 Calipers
- Shop: Shackle Bolt For Double-Eye Springs - 1/2" Diameter - Plain - 3" Long
- Video: The Low-Down on the Replacement Mounting Bracket for Kodiak Disc Brake Caliper
- Search Results: tie down engineering
- Search Results: 46304
- Search Results: caliper rebuild kit
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 7,000 lbs to 8,000 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Q&A: Can Kodiak Caliper Fit with Tie Down Engineering Disc Brakes
- Q&A: Replacing Trailer Buddy 32220 Reverse Solenoid on Ranger Boat Trailer
- Q&A: Recommended Disc Brake Kit For 2013 Magnum Trailer With 3500 lb Axles
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: Replacement Calipers for TDE 46304 on 2012 Tandem Axle Boat Trailer
- Q&A: Recommended Disc Brakes And Hubs For a 3,500LB Trailer Axle Used on Boat Trailer Used in Salt Water
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
on Trailer Hubs and Drums
