Replacement Disc Brakes for 3,500 lb TDE Axles
Question:
Do you all sell a stainless steel replacement caliper/rotor system for my tie-down engineer surge brake system? The TDE axles are 200628X9J. Thanks
asked by: David
Expert Reply:
According to Dexter your TDE axles use the standard 3,500 lb bearing combination. For a completely stainless steel disc brake system you will need the Kodiak Disc Brake Kit # K2R35S. You will also need the Kodiak Trailer Hub for 3,500-lb Axles # KH84545S. We don't have a hub/rotor assembly that is completely stainless. If you would rather have a hub/rotor then we have the # K2HR35DS which is a combination of Dacromet and stainless.
Products Referenced in This Question
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Search Results: caliper rebuild kit
- Q&A: Finding Replacement Caliper Bolts For A Tie Down Engineering 46304 Calipers
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Shop: Shackle Bolt For Double-Eye Springs - 1/2" Diameter - Plain - 3" Long
- Shop: Caliper Rebuild Kit for 6,000-lb to 8,000-lb Dexter Disc Brakes
- Shop: Caliper Rebuild Kit for AL-KO/Hayes Disc Brakes - 10,000 lbs and 12,000 lbs
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Kodiak Disc Brake Caliper - Stainless Steel - 7,000 lbs to 8,000 lbs
- Q&A: Could Stainless Steel Slip-On Kodiak Disc Brake Kit K2R35S Replace Tie Down Kit
- Q&A: What Rotor Sizes Does Kodiak Disc Brake Caliper Fit
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Q&A: Does Kodiak Brake Line Kit Work with Tie Down 46304 Calipers
- Q&A: Recommended Replacement Caliper For A Kodiak 225
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer leaf springs
- Shop: Trailer Wiring
- Video: Manufacturer Discussion - Roadmaster Comfort Ride System
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: trailer suspension parts
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Search Results: spare tire mount
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Brake Controller
- Video: Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
on Trailer Hubs and Drums
