Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper  

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

Hey Travis, While we haven't tested DeeMax's compatibility to TDE we have been receiving reviews from people that have tried and found them to be a fit. One review states that they successfully replaced their TDE 46304 calipers with…

Jim yes, the Kodiak Disc Brake Caliper #KDBC225DAC will be a good replacement for your TDE 46304 calipers. These calipers are going to work with 10" or 12" rotors ,and 3,500 lbs - 6,000 lbs axles.

The Adapter Port #DE73MR you found is an exact replacement for the one on the Caliper #DE86VR. This is designed to accept a brake line like the Kodiak #bh-3mfs90ff-1-5 and not a banjo type connection. You are going to have to alter your brake lines…

To replace the rotors of your disc brakes, the Kodiak #KR12D will work just fine as they are a standard 12-1/6" wide overall and have an inner diameter of 7-2/3" (where the hub sits). We don't have a dimensional drawing but as long as…

Hi Charles, While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator #DX33FR. This is the entire actuator assembly along with the…

Trailer brake actuators like the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR you're looking at are rated more for the brake type and not necessarily a specific amount of axles since it has to do with the amount of pressure the…

As long as that is a 3,500 lb axle with a 4-bolt brake flange on your EZ Loader boat trailer you will be able to use the DeeMaxx Disc Brake Kit #DE42FR. The slip-on rotors will fit over the 5 on 4-1/2 bolt pattern on your existing hubs without any…

Finding information on the Tie Down 46250 was not an easy task as it was discontinued awhile back. From what I could find, it looks like the calipers marked 46250 often times have to change the mounting bracket and rotor/hub in addition to the…

Thanks for the information and photo, Kenneth! It looks like your trailer is equipped with 3,500 lb axles so to replace your bearings and seals you need the kit #BK2-100, but it also looks like you have an older disc brake kit with a design that…

The DeeMaxx Disc Brake Kit part #DE42FR will require an actuator for operation. This can be either a traditional surge actuator or an electric over hydraulic actuator. If you're looking for an electric over hydraulic actuator, I recommend the…

Hey Will, I'm happy to say the answer is yes, the 3,500 lb DeeMaxx Disc Brake Kit #DE66YR is a fit for the #84 E-Z Lube Spindle #TRU74FR. The DeeMaxx hubs fit the spindle, and the grease cap on them has a rubber plug that you remove to easily…