Can Kodiak Caliper Fit with Tie Down Engineering Disc Brakes
Updated 05/31/2023 | Published 05/30/2023
Products Featured in This Question
Question:
I have a venture boat trailer with 2, 3500lb axles 10 and 3/4inch rotors. Currently have Tie Down engineering brake calipers, mounting holes 5 and 3/4inch on center, are Kodiak calipers # KDB225DAC a direct replacement?
asked by: John H
Expert Reply:
Calipers, like the 3.5K Kodiak Disc Brake Caliper # KDBC225DAC, are really only designed to work with same-branded systems so I can't recommend using this for your Tie Down Engineering system.
If you need to only replace the calipers then you'll want to get Tie Down Engineering calipers, otherwise you can switch to a whole Kodiak setup with the Kodiak Disc Brakes # KOD87FR which has all of the parts designed to fit together.
Product Page this Question was Asked From
Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Caliper Parts
- Caliper
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Q&A: Replacement Disc Brakes for Tie-Down Engineering Hub With 5 on 4-1/2" Bolt Pattern
- Q&A: Can I Use the Kodiak Rotor KR12D to Replace a Tie Down Engineering TDE46247 Rotor
- Shop: Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 3,500 lbs to 6,000 lbs
- Shop: DeeMaxx 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Search Results: brake springs
- Search Results: hanger kits
- Search Results: suspension kits
- Search Results: fender
- Search Results: torsion spring
- Search Results: ram electric jack
- Search Results: coil spring
- Shop: Dexter Zinc-Plated Brake Actuator w/ Lockout Shield - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Q&A: How To Choose The Correct Brake Mounting Flange For Your Trailer Axle
- Q&A: Can Tie Down Brackets Be Used With Kodiak 225 Calipers?
- Video: A Closer Look at the Truryde Double Lip 2.250" ID Grease Seal GS-2250DL
- Q&A: Replacement Brake Pads For A 2017 Fishing Holdings Trailer
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU37FR
- Q&A: Can Electric Trailer Brakes be Used with Hydraulic Brake Hub and Drums
- Video: All About the Kodiak Ceramic Brake Pads
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Review of CE Smith Trailer Axles - Axle Spindle Parts - CES52QR
- Video: Vesper Steel Modular Trailer Wheel Review
- Video: The Low-Down on the Americana High Pressure Rubber Snap-In Valve Stem
- Article: How to Bleed Your Trailer Surge Brakes