Towing Capacity of 2016 Jeep Cherokee with 3.2L Engine

Question

Question:

How can I adapt my jeep to get to 4500 lb capacity?

asked by: Terry

0

Expert Reply:

A vehicle's towing capacity is determined by the auto maker and is a function of the ratings of all of the specific equipment installed. The engine, transmission, cooling system, brakes and suspension all affect how much weight a vehicle can safely tow. Slightly different versions of the same base vehicle can sometimes have different towing capacities so it is best to check your own printed manual since this relates to your specific vehicle.

It is not possible to bolt on additional towing capacity to any vehicle. The 2016 Cherokee Sport, Latitude, Limited, Trailhawk and Overland with the 3.2L engine top out at 2000-lbs towing capacity unless they have the factory Trailer Tow Package which increases their tow rating to 4500-lbs. I found this information at the online Jeep towing guide.

expert reply by: Adam R

0

Answer 1

Adding aftermarket parts to your 2016 Jeep Cherokee can improve your towing experience but it's not going to increase your towing capacity. Your Jeep's towing capacity is determined by Jeep based on how it is equipped at the factory and…

view full answer...

Answer 2

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 3

Unless you are towing all the time it is a good idea to store your 4-pole wiring harness inside the car to protect it from the weather and potential damage. Yes, many folks prefer an external mount and hitches often come with a mounting bracket to…

view full answer...

Answer 4

Sorry to hear about that issue! I reached out to my contact at Curt and they have run into this issue before. The stud pictured is a grounding stud that is not used and is not always in the way, it seems Dodge did not put it in the exact same…

view full answer...

Answer 5

I have another option for you, but the grounding nut you show in your picture will interfere with the installation of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13207 you were looking at, and would need to be relocated.…

view full answer...

Answer 6

The metric equivalent of an A78-13 tire is a 175/80-13. This size is available in load range B, #AM1ST74, rated for 1,100 pounds at 35 psi. It also comes in load range C, #AM1ST76 for bias ply or #AM10199 for radial, both rated for 1,360 pounds at 50…

view full answer...

Answer 7

For a hitch that fits your 2016 Jeep Cherokee Latitude I recommend the etrailer #e62TR. The #DT28MR you were looking at is only designed to fit Trailhawk models. The etrailer hitch has a concealed cross tube so only the receiver will be visible at…

view full answer...

Answer 8

Even though the Curt Hitch #C13172 is rated to tow up to 5,000 pounds since your vehicle is rated for 4,500 pounds that is the max you can tow. You're only as strong as your weakest component. The Curt trailer hitch has a bolt on installation and…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Towing Capacity of 2016 Jeep Cherokee with 3.2L Engine

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching