See what our Experts say about this CURT Trailer Hitch

• How To Determine Tongue Weight Capacity for a 2014 Jeep Cherokee Trailhawk
  Unless otherwise noted your tongue weight capacity would be 450 lbs as the tongue weight capacity for a vehicle is almost always 10 percent of the total trailer weight it can tow. I attached a couple FAQ articles on towing to the right that you might find informative as well.
  view full answer...
• Trailer Hitch Recommendation for Non-Trailhawk 2018 Jeep Cherokee
  The Draw-Tite # DT28MR will only fit Trailhawk models, as they have a different rear bumper. If you attempted to install it on a non-Trailhawk model the bumper would get in the way and prevent you from installing it. For a non-Trailhawk 2018 Jeep Cherokee, I'd recommend the Curt Class III hitch, part # C13172. When installed, the hitch will be mostly concealed behind the bumper with the only visible portions of the hitch being the square receiver tube and the safety chain hoops. The installation...
  view full answer...
  
• Trailer Hitch for 2014 Jeep Cherokee Sport 2.4 L Front Wheel Drive
  The Curt hitch part # C13172 is a fit for your 2014 Jeep Cherokee front wheel drive and would be a really great option as it has plenty of towing capacity and also is mostly hidden since only the hitch opening hangs below the rear bumper.
  view full answer...
• Will Curt Trailer Hitch Receiver Fit 2017 Jeep Cherokee Latitude
  Yes, the Curt Trailer Hitch Receiver # C13172 you referenced comes with all of the hardware needed to install it. This trailer hitch is compatible with all 2017 Jeep Cherokee models so it will fit your Latitude. In fact, the attached installation video and photo is on this trailer hitch installed on a 2017 Jeep Latitude. If you let me know what you plan on using the trailer hitch for I can make additional recommendations if necessary.
  view full answer...
  
• Trailer Hitch and Wiring Recommendation for 2015 Jeep Cherokee
  For your 2015 Jeep Cherokee the Curt hitch part # C13172 is a confirmed fit and would be an excellent option. This hitch has a concealed cross tube which gives the rear of your vehicle a much cleaner look. For trailer wiring you then would want the part # C56208 which is a confirmed fit as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
  view full answer...
  
• Does Higher Capacity Hitch for 2016 Jeep Cherokee Increase Towing Capacity
  The towing capacity of any vehicle is always the lowest rated component in the setup. So you can certainly install a hitch with a higher weight capacity like the Curt # C13172 but you still would be limited to the 2,000 lb capacity overall. The reason the hitches are rated higher is that they design a hitch to fit the vehicle and then do their best to make it as strong as possible and rate it independently of the vehicle which is where the difference comes from.
  view full answer...
• Recommended Trailer Hitch for Cherokee 2015 Latitude 2x4
  The Curt Class III Hitch, part # C13172 is indeed a fit for your 2015 Cherokee Latitude. If you don't already have a bike rack, you can't go wrong with the Thule Hitching Post Pro, part # TH934XTR, which is a popular bike rack for our customers who own the 2014 or 2015 Cherokee. If you'll be transporting women's bikes or bikes with sharply-angled top tubes, you might also consider a frame adapter bar like part # 64005. The bar spans the distance between the handlebar gooseneck and the...
  view full answer...
• Troubleshooting Trailer Wiring Harness Installation On 2014 Jeep Cherokee Latitude
  When installing the Curt T-Connector Trailer Wiring Harness on your 2014 Cherokee, you want to make sure you have the power wire from the powered converter run to the vehicle battery, and that you have the inline fuse installed. I recommend using a circuit tester like part # PTW2993 to test the pins on the 4-way connector for function. If you do not show power for the functions, you probably have a power wire issue, and the powered converter is not receiving the 12V power needed. You...
  view full answer...
• Why Is there Time Difference for Install of Curt and etrailer Hitch on 2017 Jeep Grand Cherokee
  The install time ratings are not determined by us and are instead determined by the hitch manufacturers. So with that in mind the different companies don't always end up estimating the same amount of install time, even when their hitch designs are so similar they almost seem identical. So that is why the Curt hitch part # C13172 has a 40 minute install time and the etrailer # e73ZR has an hour twenty minute install time. Based on capacities and the Curt being made in the USA that's the...
  view full answer...
• Is Trailer Hitch Secure to Underside of 2018 Jeep Cherokee?
  While it is accurate that there isn't much clearance between Curt hitch # C13172 and the muffler on a 2018 Jeep Cherokee, it is bolted onto the frame of the vehicle. It should be sturdy and not move to hit the muffler if torqued to the correct specs, which you can see in the linked directions. It is, of course, possible that extremely rough terrain could cause some vibration but if installed properly the hitch and muffler should peacefully coexist. I've added a link to a video install of...
  view full answer...
• Availability of Trailer Wiring Harness for 2015 Jeep Cherokee
  The Tow Ready T-One connector # 118605 is compatible with a 2015 Cherokee Limited, as Tow Ready has confirmed. I've linked you to an install video as well as to a list of other items available for your Cheorkee, in case you're interested. If you don't already have a hitch, I'd recommend the Curt # C13172. For a ball mount, use part # D-4 and Hitch Pin and Clip, # PC3. For a 1-7/8 inch trailer ball, use part # 19260 or # 63845 for a 2 inch ball.
  view full answer...
• Hitch and Trailer Wiring Recommendation for a 2015 Jeep Cherokee
  First you will need to start with a trailer hitch for your 2015 Jeep Cherokee Sport. For that the Curt Hitch part # C13172 is our most popular option that would work great for you. I attached an install video for you to check out as well. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
  view full answer...
• Compatibility of the Flint Hill Goods 30x50 Wheel Chair Carrier on a 2015 Jeep Cherokee
  If your friends Jeep is either a Cherokee or the Grand Cherokee, then they will be able to use the Flint Hill Goods 29" x 49" Carrier w/ 60" Ramp - 2" Hitch - 500 lbs # FHG69ZR, as long as they have a 2-inch receiver trailer hitch installed and the weight of their wheelchair does not exceed 500 lbs. If they are needing a hitch, then for the 2015 Cherokee Latitude, Latitude Altitude, Limited, Sport, or Trailhawk models, the Curt Class III 2 Inch Trailer Hitch, # C13172, will work with the...
  view full answer...
• Battery Dies After Installing Curt Harness # C56208 On My Vehicle
  There could be a few reasons that is causing your battery to drain after installing The Curt Harness # C56208. I recommend first testing to see if you have a bad converter box. While the fuse is in place, test the 4-way flat connector on the harness without any vehicle lights on using The Hook Probe Circuit Tester # PTW2993. You will need to test each pin. If you're getting a constant power at any of the pins with the vehicle lights off, then the converter box is bad and would need to be...
  view full answer...
• How Much Can My 2016 Jeep Cherokee Latitude Tow When Curt Hitch # C13172 Is Installed
  Even though the Curt Hitch # C13172 is rated to tow up to 5,000 pounds since your vehicle is rated for 4,500 pounds that is the max you can tow. You're only as strong as your weakest component. The Curt trailer hitch has a bolt on installation and has a gloss black powder coat finish that will offer you superior rust resistance. I like this hitch because it is manufactured in The USA. To tow a trailer you will also need a trailer wiring harness. If your vehicle already has the factory...
  view full answer...
• Trailer Hitch Receiver Recommendation for a 2015 Jeep Cherokee
  I checked with Curt and they list the Curt Hitch part # C13172 that you referenced as a fit for your 2015 Jeep Cherokee Latitude so it will work for you. The part # C56208 is the correct wiring kit as well.
  view full answer...
• Will the Curt Hitch part # C13172 and part # C13171 Have Same Ground Clearance
  Both the Curt hitch part # C13172 and the part # C13171 will sit right under the rear bumper of a 2014-2015 Jeep Cherokee when installed so one would not have any more ground clearance than the other. The biggest difference between the two is that the # C13172 has a hidden cross tube so it would be less visible when installed. I attached an install video for you to check out for this hitch.
  view full answer...
• Trailer Hitch Extender Recommendation for 2014 Jeep Cherokee Limited with Cargo Carrier
  According to the measurements taken when installing the Curt Trailer Hitch Receiver, # C13172, on a 2014 Jeep Cherokee, there is 5 inches from the hitch pin hole to the outer most edge of the bumper. I have attached a picture that illustrates this measurement. In order to increase the clearance for your existing cargo carrier, you could use a hitch extender like the # HE06. Please keep in mind that using an extender decreases the weight capacity of the hitch by 50% and you could experience...
  view full answer...
  
• Towing Capacity and Trailer Hitch Recommendation for 2019 Jeep Cherokee
  I took a look at the online copy of the owner's manual for a 2019 Jeep Cherokee and no matter what engine you have if you do NOT have the Trailer Tow Package the maximum trailer weight you can tow is 2,000 lbs. If you DO have the Trailer Tow Package and have a 2.0L engine your capacity is 4,000 lbs and if you have a 3.2L your capacity is 4,500 lbs. The trailer hitch I highly recommend for your '19 Jeep Cherokee is the etrailer Hitch # e73ZR because it has a concealed crosstube and is a...
  view full answer...
  
• Towing Capacity of 2018 Jeep Cherokee Trailhawk with Factory Trailer Hitch
  The towing capacity of your 2018 Cherokee Trailhawk will depend on how it was equipped from the factory. If you have the 2.4L or the 3.2L engine without the tow package, the vehicle towing capacity is limited to 2000 lbs/200 lb tongue weight. If you have the 3.2L engine and the Trailer Tow Package, the vehicle can tow up to 4500 lbs/450 lbs tongue weight. The tongue weight of what you're towing is a very important consideration to take into account. If you're unsure of whether the vehicle...
  view full answer...
• Recommended Complete Towing Package For 2016 Jeep Cherokee Latitude
  On your 2016 Jeep Cherokee Latitude, to get all the towing functions, I recommend you begin with the trailer hitch receiver. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13172 For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118605 that will attach to factory connectors behind your tail lights and then connect to your vehicle battery to protect your factory wiring from overload. Then you will need...
  view full answer...
• Class III Hitch for 2019 Cherokee Latitude That Requires No Trimming of Fascia or Bumper Cover
  For your 2019 Jeep Cherokee Latitude we have two Class III hitch fits from Curt, parts # C13172 and # C13171. We recently had the chance to install hitch # C13171 on a 2017 Cherokee and that video is linked for your reference. This specific hitch is a less-invasive install than the other but I did contact Curt technical to make certain that no trimming of the bumper cover or rear fascia is needed to mount this on your Cherokee. You'll want the hitch # C13171.
  view full answer...
• Best Concealed Trailer Hitch Receiver For 2018 Jeep Cherokee Latitude
  The best concealed trailer hitch receiver for your 2018 Jeep Cherokee Latitude with twin exhausts is from Curt, and is the following part number: - Curt Trailer Hitch Receiver # C13172 This is a Class III hitch with a 2" receiver and 5,000 lb capacity, and I have added a photo for you of the hitch on a Cherokee with twin exhausts so you can see exactly what it will look like on your Jeep. As you can see, no part of the crosstube is showing at all, and only the receiver will be visible. The...
  view full answer...
  
• Adding a 5-Way Trailer Connector to a 2016 Jeep Cherokee
  If your 2016 Jeep Cherokee did not come with the factory tow package then the first step is to add a 4-Way flat connector using # 118605. I have linked a video showing an example installation for you. You can then turn it into a 5-Way by adding 4- to 5-Way adapter # 20036. Please note that a 4-Way flat can plug into a 5-Way receptacle so you won't have to have 2 different connectors on the Jeep. With the adapter you will need to find a place to tap into the reverse light wire. Jeep put...
  view full answer...