How To Replace The Roof Vent Cover On The Ventline Ventadome Trailer Roof Vent # V2110SP-24
Updated 04/01/2011 | Published 03/30/2011
Question:
I broke the white cover and got a replacement cover from my local dealer. I got it home but dont see how I can get the cover to go high enough to get it off. what is the steps to replace just the cover Thanks
asked by: Paul B
Expert Reply:
I walked out to our warehouse and pulled the Ventline Ventadome Trailer Roof Vent, part # V2110SP-24, and had to disassemble the vent to remove to vent cover.
To start, open the vent as much as possible. Then hold the knob in place while you loosen the screw in the center of the knob with a Phillips-head screwdriver. After removing the knob, you will need to use a square-bit screwdriver head to unscrew the knob mounting bracket. After unscrewing the bracket, you can slide the bracket and connecting metal rod downward. Once it is slid down you will want to use a flat-head screwdriver to push the metal tab on the rod outward and the assembly should come apart allowing the vent cover to open all the way. Then you will slide the vent cover to the end that does not have the metal crimped edge on the hinge. The cover will slide off and you can slide the new cover on and re-assemble the vent in reverse order of how you took it apart.
Product Page this Question was Asked From
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal
- RV Vents and Fans
- Vent
- Roof Vent
- Manual Lift
- No Fan
- Plastic and Metal
- Silver
- Ventline
more information >
Continue Researching
- Shop: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic
- Video: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent Review
- Video: Ventline Ventadome Replacement Vent Installation - 2019 K-Z Sportsmen Travel Trailer
- Video: Ventline RV Vents and Fans BVC0573-31 Review
- Shop: Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents - Birch White
- Shop: Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- Shop: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- Video: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent Spec Review
- Shop: Suspension Enhancement
- Shop: SuperCoils Custom Suspension Coils - Front Axle
- Shop: Hellwig Front Anti-Sway Bar - 1-3/8" Diameter
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: One Year Later | Firestone Airide Helper Springs and Heavy Duty Air Compressor
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Q&A: Replacement Propane Gas Detector for an Atwood 31013 Propane Detector
- Search Results: suspension enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
on RV Vents and Fans
