Can the etrailer Ploy Caster Wheel Replace the Steel Castor Wheel on a Bulldog Jack
Updated 07/05/2017 | Published 07/03/2017
Question:
will castor wheel code jwk-6p replace bulldog wheel code 500282 ? i would rather have a poly wheel and it is cheaper. thanks
asked by: Ross A
0
Expert Reply:
I went to our warehouse and measured the pin of the etrailer # JWK-6P castor wheel. The castor can take up to a 1/2 inch bolt. The same as the Bulldog Steel Castor 500282.
The etrailer castor has the same wheel dimensions. 6 inch diameter x 2 inches wide, as the Bulldog caster. As long as you do not exceed the 1,200 lbs capacity of the wheel, the etrailer wheel will work for this application.
expert reply by:
Jared P
0
Product Page this Question was Asked From
Removable, 6" Poly Caster Assembly for etrailer or Ram Jacks - 1,000 and 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Hardware
- etrailer
more information >
Continue Researching
- Q&A: Disc Brake Assemblies For Changing A 12,000LB Dexter Axle To Hydraulic Disc Brakes
- Q&A: What Does JJ Mean When Looking at Wheel Size on Trailer
- Q&A: Replacement Converter For Parallax 7300 Series
- Q&A: How to Install a Brake Controller on a 2018 Honda Pilot
- Q&A: How Thick is the Replacement Bearing for etrailer and Ram Square Jacks # TJD-7000-BR
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Replacement Optronics SAE P2A 01 DOT Trailer Light Lens
- Q&A: Replacement Remote Receiver For A Retrax Tonneau Model 4100-017 Made In 2010
- Article: Trailer Maintenance Schedule
- Article: RV Pre-Departure Checklist
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Where to Position the Trailer Axle?