What Size Bolt comes with the etrailer.com Removable 6" Caster Assembly # JWK-6P

Question

Question:

What is the bolt size? The jack wheel Im replacing is 1/2

asked by: Bill S

1

Helpful Expert Reply:

The bolt that comes with the etrailer.com Removable 6" Caster Assembly, # JWK-6P, measures 3 inches long. It has a 7/16 diameter thread and the main shaft measures 1/2" (see photo). This caster assembly uses a steel bushing that has an outer diameter of 5/8" and the wheel is 2 inches wide.

expert reply by: John H

1

click to enlarge

Alan H.

7/11/2020

What is the hub length for this caster please. I need a 2.25" hub length. Thanks, Alan

Chris R.

7/15/2020

The etrailer Caster # JWK-6P has a 2" width.

Answer 1

Hey Mike! You can use the Fulton Boat Trailer Jack w/ Wheel #FTJ120W0301 on your 1998 Four Winns 180 Horizon. However, you will need to measure to see if this matches the current bracket. See the attached photo with measurements. Worst case you can…

view full answer...

Answer 2

We do offer replacement plastic wheels for a range of trailer jacks. For example, part #F6811S00 is a replacement 6-inch plastic wheel that works with Fulton marine jacks (excluding models TJD125 and TJD103). This wheel has a 1200-lb weight capacity,…

view full answer...

Answer 3

I wish we had a rebuild kit for your trailer jack but that's not something that's available due to the age of the jack. The best and most similar solution we have then would be the Fulton trailer jack part #FTJ120W0301 which has a 1,200 lb…

view full answer...

Answer 4

We have the Kodiak Disc Brake Kit #K2R1258L12 that is designed to fit your 12,000lb Dexter axle. You will need to ensure that you have the Standard Duty 12,000lb axle as this kit will not fit if its a Heavy Duty 12,000lb axle. If you need help…

view full answer...

Answer 5

The "JJ" that you mentioned finding on the wheel size listed for the units mounted to your trailer refer to the contour of the bead seat on the wheel, essentially its shape ( "J" indicates the shape of the letter J). This…

view full answer...

Answer 6

The proper replacement for your Parallax 7300 series converter is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V.

view full answer...

Answer 7

The best brake controller we have for your 2018 Honda Pilot is the Tekonsha Prodigy P3 Trailer Brake Controller part #90195. This a proportional brake controller that has integrated safeguards to protect the vehicle/trailer and continuous diagnostics…

view full answer...

Answer 8

Hey William, the thrust bearing part #TJD-7000-BR that you referenced is 1/2 inch thick. If you are trying to verify this is correct fit by it's dimensions it's worth mentioning that the outer diameter is 1.519 inch and the inner diameter is…

view full answer...

Answer 9

I checked with my contact at Retrax and they ran your serial number. They confirmed that the F09-2027 will be the correct remote receiver kit for your cover. We have this listed under part #RTX89TR, so it looks like you were on the right track in the…

view full answer...

Answer 10

The SAE number you provided in your question isn't always the most accurate way to determine a correct replacement assembly. This is simply because it does not refer to the actual light part number, but to various safety guidelines that it meets.…

view full answer...

What Size Bolt comes with the etrailer.com Removable 6" Caster Assembly # JWK-6P

Product Page this Question was Asked From

Continue Researching