Parts Needed to Flat Tow a 2008 Toyota Corolla
Updated 03/23/2017 | Published 03/22/2017
Products Featured in This Question
Question:
What parts are needed to flat tow a 2008 corolla w manual transmission. Best economical set-up?
asked by: Jeff
Helpful Expert Reply:
First you need a base plate kit like the Roadmaster XL part # 1165-1 which is a confirmed fit. This will work well with the StowMaster part # RM-501 which is an economic option that still is a great tow bar.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BRK2019, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. There really isn't a safe cheap option here though.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Roadmaster StowMaster Tow Bar - Coupler Style for 2" Ball - Car Mount - 6,000 lbs
- Tow Bar
- Coupler Mount
- Telescoping - Binding
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates
- Stores on Car
- Cables Not Included
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 8700
- Search Results: 88400
- Search Results: 76511
- Search Results: 521567~5
- Shop: Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles - 20-Amp ATM Mini-Fuse
- Shop: Roadmaster InvisiBrake Flat Tow Brake System - Preset
- Shop: Roadmaster Brake-Lite Relay Kit for Towed Vehicles
- Shop: Pulley Mounting Bracket for Roadmaster InvisiBrake Flat Tow Brake System
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: Vehicle Tow Bar Brake System
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Wiring
- Search Results: 9243~1
- Search Results: 522
- Shop: Roadmaster Accessory Kit for Falcon Tow Bars - Tail Light Wiring - Safety Cables - Lock Set
- Search Results: rm 676
- Shop: Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs
- Shop: Suspension Enhancement
- Shop: Windshield Wiper Blades
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Shop: Trailer Wiring
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Flat Towing Parts for a 2025 Ford Bronco w/a Standard Bumper and LED Lights
- Video: Comparing Portable Flat Tow Braking Systems - Curt RVi and Blue Ox Patriot
on Tow Bar
