Class V Trailer Hitch for a 2007 Chevrolet Silverado Classic 1500

Question

Question:

I am driving a 2007Chevy Silverado 1500 Classic. I want a snug fitting trailer receiver so it doesnt interfer with my exhaust system. I also want a class 5 receiver. I think this one Code: C15323 is the one for me, am I right?

asked by: Tim

0

Expert Reply:

If your Silverado has a factory bumper, then yes, the Curt Trailer Hitch, part # C15323, is the hitch that you will want to install on your 2007 Chevy Silverado Classic 1500. This hitch has a max Gross Trailer Weight (GTW) of 16,000 lbs, 17,000 lbs when used with a Weight Distribution (WD) system, and a max Tongue Weight (TW) of 2,400 lbs which doesn't change when using a WD system. Please note that this hitch will not fit SS models.

If your Silverado has a deep drop bumper, then you will want to use the Class III Curt Trailer Hitch part # 13339. This hitch has a max GTW of 8,000 lbs with or without a WD system, and a max TW of 800 lbs with or without a WD system.

If your Silverado has the aftermarket Roll Pan Bumper then you will want to use the Class III Curt Trailer Hitch part # 13932 which has a mx GTW of 5,000 lbs, 8,000 lbs when using a WD system, and a TW of 500 lbs, 800 lbs when using a WD system.

I have attached some links to installation videos for some of the hitches.

expert reply by: Jon G

0

Answer 1

We don't specify between the 1500 and 1500 HD in terms of fit in our guide, but I did check with our manufacturers for you to verify the fits for a trailer hitch receiver on your 2003 Chevy Silverado 1500 HD. The correct fit is going to depend on…

view full answer...

Answer 2

There are heavy-duty Class V trailer hitch receivers that fit your 2004 GMC Sierra 2500 LD, though the hitch you mentioned is only a fit for the 2500HD model. You need to have the standard factory bumper on your truck, and if you do, then there are…

view full answer...

Answer 3

You are correct. For the 2001 Chevy Silverado 1500, the Curt #13932 is the only available hitch that can be used with the roll pan bumper. If you wanted to use one of the hitches designed to circumvent the deep drop bumpers that were often found on…

view full answer...

Answer 4

Hello Chad, thanks for reaching out. Sounds like you are on the right track here. The Curt #C56413 is correct for your 2016 Ford F-150 XLT, and you can use the #C36GJ socket to make it into a 7-way/4-flat combo. Those two parts actually cover…

view full answer...

Answer 5

Yes, the correct etrailer Trailer Hitch for your 2014 Chevy Silverado 1500 is the one you mentioned: etrailer Trailer Hitch Receiver - #e98860 Attached is an installation video for you to check out.

view full answer...

Answer 6

The highest capacity 2 inch hitch we offer for your 2006 Chevy Silverado is the Curt Hitch part #C15323 which has a 2,400 lb tongue weight capacity and 17,000 lb total trailer weight capacity. I attached an install video for this hitch for you to…

view full answer...

Answer 7

The Class V B&W trailer hitch #BWHDRH25217 would be a great option for your 2002 Chevy Silverado 1500. This hitch is rated for 16,000 pounds gross trailer weight and 1,600 pounds tongue weight. But the hitch would be limited to the towing…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Class V Trailer Hitch for a 2007 Chevrolet Silverado Classic 1500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching