bing tracking image
Q & A Icon

Brake Controller Install Harness Location for Prodigy P2 in a 2015 Toyota Tacoma  

Updated 02/17/2020 | Published 01/29/2017

Question:

any idea where this is located? I need to install a Prodigy 2 but am struggling with where the harness is to plug in.

0

Expert Reply:

To install the Prodigy P2 part # 90885 in your 2015 Toyota Tacoma the install harness part # 3040-P is the correct one to use.

The plug in a Tacoma is extremely well hidden. It is high above the driver's side kick panel taped behind a plug wrapped in foam. I have attached a photo to help you locate it in a late model Tacoma. It's the white connector.

expert reply by:
0
Jameson C
click to enlarge
Lindsay N. profile picture

Lindsay N.

2/13/2020

Will the tekonsha #3040 work with the redarc proportional brake controller on my 2013 Toyota Tacoma?

Jason S. profile picture
Etrailer Expert

Jason S.

2/17/2020

For your 2013 Toyota Tacoma with factory 7-way, you will use the wiring harness # RED49FR to plug into your dash harness and then plug it into the Redarc # RED24FR. If you do not have the factory 7-way in your truck, then you will need to use kit # ETBC7 to hardwire your brake controller. I've attached some videos and an article to assist.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>