Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The auxiliary 12-volt wire that runs from the 7-way connection to 7-way trailer plug will supply 12-volt power from the vehicle to the trailer. The 12 -volt power will allow interior or exterior lights to run that are not wired in to the…
view full answer...The Prodigy P3 item #90195 is compatible with your 2017 Toyota Tundra. This is a proportional brake controller that activates your trailer's brakes when your Tundra decelerates. You will want to use the Custom Wiring Adapter for Trailer…
view full answer...We have everything you need to set your 2013 Jeep Grand Cherokee up for towing. Starting with the trailer hitch, I recommend going with the Draw-Tite Class III Max Frame Receiver Hitch #75699. This hitch is going to sit slightly further back from the…
view full answer...For your application I recommend checking out the Curt RockerBall Shock Absorbing 2" Hitch Ball which comes with a 3/4" diameter shank as part #C94CR or with a 1" diameter shank as part #C40047. This unique hitch ball absorbs the shock…
view full answer...On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.
view full answer...To determine the correct inner and outer bearing, race and grease seal needed, you will need to take some accurate measurements from the spindle. If you will look at the diagram of the spindle on the right, we will need the B, C and D dimensions. In…
view full answer...If your 2001 Dodge Durango has the factory installed 7-way trailer connector on the rear bumper, the port for the brake controller should be located near the emergency brake pedal. I am sending a video link of a brake controller installation on a…
view full answer...We have successfully installed brake controllers in Ford Escapes just like your 2014 model without any problems at all. Check out the video I attached that shows us installing our best selling P3 part #90195 in a 2013 model with the #ETBC7 kit. I…
view full answer...The number ( 411 D) you provided doesn't correspond with a Fan-Tastic Vent roof vent model number, but if yours uses the remote control #FV9068-09 that you referenced, that tells us it's a 7350 Series Fan-Tastic Vent Roof Vent, like…
view full answer...The Atwood GE16EXT 10 gallon water heater has 23.5" x 19.4" x 18.2" dimensions so you'll have to make alterations to the cutout hole to fill in the gap from any of the water heaters we carry. I recommend the Furrion RV Tankless…
view full answer...From what I can find the dimensions of the Apollo Halftime RV Microwave AAC240TRB are 12" T x 20.6" W x 20.5" D. If this is the case with yours then the closest option we have available size-wise would be the Furrion Standard RV…
view full answer...The RedArc Tow-Pro Elite #RED44FR is comparable in reliability and performance to the Tekonsha Prodigy P3 #90195. The difference is really in the design and features. One of the greatest aspects of the P3 is the LCD screen and presets. One of the…
view full answer...Related Searches
Filter Your Search
Contact and Help