Recommended Tekonsha Brake Controller Wiring Adapter for 2008 Toyota Tacoma with Factory 7-Way

Question

Question:

Hi! Looking to buy a electric brake control harnes for a 2008 ToyotaTacoma with towing package. The brake control brand is a Tekonsha 80500. I looked in your web and the one that matches is the 3040-P. Verify for me if it is the correct one. Thanks for your help!

asked by: EDWIN S

0

Expert Reply:

You are correct that the Tekonsha brake controller wiring adapter for your 2008 Toyota Tacoma with factory 7-way is part # 3040-P. This wiring adapter allows for fast plug-in installation of any Tekonsha brake controller such as the PowerTrac # 39523.

The linked video shows this part being installed in a 2012 Tacoma.

expert reply by: Adam R

0

Answer 1

The only way to verify if your 2006 Toyota Tacoma will accept the Tekonsha Plug-In Wiring Adapter #3040-P is by finding out if it came with the factory tow package. We have only installed this on one 2nd generation Tacoma in our shop and it was a…

view full answer...

Answer 2

To install the Prodigy P2 part #90885 in your 2015 Toyota Tacoma the install harness part #3040-P is the correct one to use. The plug in a Tacoma is extremely well hidden. It is high above the driver's side kick panel taped behind a plug wrapped…

view full answer...

Answer 3

There are two different installation scenarios for your Tacoma. If your Tacoma came from the factory with the OEM 7-way, the only other thing in addition to the brake controller would be the brake control wiring adapter, part #3040-P. The 3040-P…

view full answer...

Answer 4

To install the Prodigy P2 Brake controller part #90885 in your 2006 Toyota Tacoma all you would need is the install harness part #3040-P which is a confirmed fit for both the controller and your truck. I attached an install video that shows this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Tekonsha Brake Controller Wiring Adapter for 2008 Toyota Tacoma with Factory 7-Way

Featured Help Information

Miscellaneous Media

Continue Researching