Square holder attaches to your E track and secures tools and supplies horizontally. Ideal for holding tubing and other long equipment or supplies that may be too tall for a vertical holder.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, it's Randy again here at etrailer.com. Today we're gonna be taking a look at a different style of tool holder designed to work with both E-track and X-track. Basically this one's from Brophy. It's gonna give us a four inch by four inch end side holder. This is gonna work out really well for items that are just to long or that you don't want rolling around on the floor. They're sold as a single piece.
Here you can see we're using two of them in conjunction. That's helping to keep our extrusion lined up.Now, comparing these with other types that are available, most often times in this style you're gonna see them round. Whether they're a six inch or two inch circle. You can see here with the extrusion, having that square bottom allows these to stack in there better. If this we're rounded they'd be more bunched up, so I think that's gonna give you a good solution for those more flat items or things that you want to kind of have laying flat.Now something you may be concerned with is the distance from our mounting surface to the actual end of our holder.
In this situation it looks like we're right at about four and seven eighths of an inch. Now as far as installing the holder goes, it's really just like any other E or X track accessory. We wanna push in our release tab, slide that side up and in first, rotate the bottom in and just push it down till that clicks into position.At that point we're ready to put in whatever item is that we wanna have held in place. Now overall we've got nice heavy duty steel construction here. Nice and thick all the way around.
No movement. No flex to it, so it's nice and solid. To make sure it lasts for a very long time, we don't have any issues with rust or corrosion. Gonna have that clear or that white zinc finish over it. So even if we're using it outside, we won't have to worry about those issues.All and all I think if you're looking for some cargo management solutions such as this and you don't wanna use the standard round style tool holders, these can give you a really good substitute.
Give you exactly what you're looking for depending on your situation.
I'm a High School Band Director who uses a trailer to get instruments from performance venue to school and back. My previous trailer didn't have any E-track hardware and I just did the best we could. There was always a great deal of shifting of equipment during transport. Now that my current trailer has E-track hardware, I can secure all of my equipment easily and quickly reorganize the entire trailer according to the job's requirements. If you've not got E-track, get it. It's more than worth it's cost in saving of time and convenience.
These tool holders are unversal we use them for tools and strap supplies down
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.