How to Pick Out Trailer Hubs and Brake Assemblies for Camper
Published 09/28/2016 >
Question:
Have a 2006 Rockwood Freedom 1910. What size drums and brakes do I need? Id like to buy drums, brakes, and anything else I might need all at the same time. Thanks in advance, Brad.
asked by: Bradley P
Expert Reply:
The model numbers you listed do not reference any of the parts that we carry but we can still help you get the replacement parts you need.
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Once you find the hub you need the correct brake assembly will be listed in the related parts on the product page of the hub.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 6000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer jack
- Shop: etrailer Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2,000 lbs
- Search Results: propane fittings
- Search Results: trailer brake controller
- Search Results: trailer brakes
- Search Results: electric winch
- Search Results: adapter fittings propane fittings
- Search Results: electric hitch
- Video: Review of etrailer Trailer Jack - Electric Trailer Jack - e72QV
- Shop: Brake Controller
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Venturer NEXT Trailer Brake Controller w/ Plug-In Harness - Up to 3 Axles - Time Delayed
- Shop: etrailer Electric Trailer Jack w/ 7-Way - Drop Leg - A-Frame - 18" Lift - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: MB Sturgis Sturgi-Stay T-Fitting - Type 1 Valve - 1/4" FIF and Disposable Cylinder Ports
- Video: etrailer Electric Trailer Brakes Review
- Video: Installing the Curt T-Connector Vehicle Wiring Harness on a 2024 Honda Odyssey
- Video: Install: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2009 Honda Odyssey
- Q&A: Can Little Red Campfire Connect to RV Propane Source
- Q&A: How To Attach Grill To Quick Connect Port On Side Of RV
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Roof Rack
- Video: Installing the etrailer Trailer Hitch Receiver on your 2022 Honda Odyssey
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels


