Disc Trailer Brake Kit Recommendation for a 1997 EZ Loader Boat Trailer
Updated 10/25/2010 | Published 10/22/2010
Products Featured in This Question
Question:
I have a 1997 EZ loader boat trailer with 10 drum brakes and 13 five bolt wheels. Will the titan conversion kit work on this axle. The inner and outer bearings and races are the same part numbers. Your add indicates for 14 and 15 wheels.
asked by: Vern M
Expert Reply:
With 13 inch wheels, you will need a different set up to add disc brakes to your boat trailer. For the brakes, I recommend the Kodiak Disc Brake Kit - 10 Inch Hub/Rotor - 5 on 4-1/2 - Silver Cad, # K2HR35DS for inner bearing and race L68149 and L68111, outer bearing and race L44649 and L44610. These are designed for 13 inch wheels and the silver cad finish provides superior corrosion resistance for marine applications.
Your wheels will need to have a 5 on 4-1/2 bolt pattern. The bearings and seals are sold separately, if these bearings match the ones you have, you will need bearing kit, # BK2-100. This kit comes with races, too, but so does the brake kit. You would need 2 bearing kits per axle. For grease caps, use # RG04-020. I have included a link to the installation details.
You can use the same actuator that comes with the Titan T4843500 kit you have referenced. You will need Dexter Brake Actuator with Electric Lockout, Bolt On, 7,500 Pounds # 099-175-20. I have included a link to the installation details below.
Last, you will need Brake Lines and Fittings for Single-Axle Trailer, # 9505. I have included a link to the installation details for this kit below.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: demco brake actuator
- Search Results: brake actuator
- Shop: Demco DA86 Brake Actuator for Disc Brakes w/ Lockout, Solenoid, and Cover - 2" Ball - 8,600 lbs
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Search Results: ez lube cap
- Search Results: 7 way cord
- Search Results: 7way plug
- Search Results: zerk fitting
- Search Results: disc brakes brake actuator
- Shop: Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Grease Zerks for E-Z Lube and Nev-R-Lube Axles - Thread-In - 1/4" OD x 5/16" Long
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Video: Checking Out the Kodiak Hydraulic Brake Line Kit
- Video: Kodiak Disc Brake Kit: The Breakdown
- Q&A: Parts Needed To Convert Boat Trailer With Tandem 3,500LB Axles To Electric Over Hydraulic Disc Brake
- Video: Review of Demco Brake Actuator - DA86 Trailer Disc Brake Actuator - DM78CV
- Video: Review of Dexter Axle Grease Zerks EZ Lube Spindle - DX76HR
- Q&A: Recommended Disc Brakes for Shoreland'r Boat Trailer Used In Salt Water with 3,225 Lb Axles
- Q&A: Kodiak Disc Disc Brake Kit Replacement for 2019 Coyote Dual Axle Boat Trailer
- Q&A: Recommended Replacement Disc Brakes For A 2008 Trail-Rite With UFP DB-42 Brakes
- Q&A: Replacement Disc Brakes for 3,500 lb TDE Axles
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Q&A: What Size Fittings Does Kodiak 225 Caliper Take
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
on Accessories and Parts
