What Gauge Wire Would be Required for Trailer with LED Clearance Lights that Draw 3.3 Amps
Published 07/07/2016
Products Featured in This Question
Question:
I am installing 42 clearance lights on a trailer that I just purchased from you, MCL13CA2B, MCL13CR2B, each light is 0.046 amp, also installing 4 STandT, STL89RCB, each light draws .350 on Turn and Stop, .022 on Tail, what size wire should I run for the LED lights? do you have a Chart? The trailer is 7ft. tall, 20ft. long, Enclosed, lights running top and bottom of trailer, thanks,
asked by: Ken O
Helpful Expert Reply:
Even thought that is a quite a few LED lights on your trailer the amount of amperage draw total for all circuit would be 3.35 amps. That's well below what standard lights would draw on trailers with just a handful of incandescent lights.
You would easily be able to get away with 14 gauge or even 16 gauge wire.
Product Page this Question was Asked From
LED Trailer Mini Clearance or Side Marker Light - Submersible - 2 Diodes - Amber LEDs - Clear Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 2-1/2L x 1-1/16W Inch
- Amber
- Optronics
more information >
Continue Researching
- Shop: Trailer Wiring
- Video: In-Depth Review of the 12 Gauge Black Primary Wire
- Video: Review of Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - TK57VR
- Video: Hands-On with the Electric Trailer Brake Assembly
- Q&A: Recommended Gauge of Wiring for Trailer Lights
- Shop: 12 Gauge 2 Conductor Jacketed (Brake) Wire Per Foot
- Shop: Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector
- Search Results: trailer wiring kit
- Search Results: 14ga wire
- Search Results: trailer wiring
- Search Results: tekonsha trailer brake controller
- Search Results: trailer wire
- Q&A: Is 14 Gauge Wire Too Small for Electric Trailer Brakes
- Q&A: Wire Gauge for the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Q&A: What Gauge Wire Should be Used When Installing Brake Assemblies on a Trailer
- Q&A: How To Properly Ground The Wires On Electric Drum Brakes
- Q&A: Where are the Ground Wires Located on Electric Trailer Brakes
- Q&A: What Gauge Wire Do The Dexter Electric Trailer Brakes 23-47-48 Use?
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: 10 Gauge Wire - Blue Primary - Per Foot
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: 12 Gauge Wire - Black Primary - Per Foot
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Search Results: brake controller
- Search Results: tj01rt~hd
- Article: Trailer Lighting Requirements
- Shop: Trailer Hitch
- Video: Deka Jacketed 4-Wire Spec Review
- Video: The Low-Down on the Deka Wire