What Gauge Wire Do The Dexter Electric Trailer Brakes 23-47-48 Use?
Updated 01/19/2026 | Published 08/05/2024
Products Featured in This Question
Question:
What gauge is the wire, so I can buy the correct size butte connectors. Im thinking its 10-12g.
asked by: Ted
0
Expert Reply:
Hello Ted. The Dexter Electric Trailer Brakes # 23-47-48 use 14 gauge wire. We recommend using 10 gauge wire like part # 10-1-1 which we sell by the foot. For a butt connector I recommend using part # 05732-2. These are made for 10 or 12 gauge wire but they can easily be clamped tight enough for 14 gauge wire.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 2200 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: dexter 8~247
- Search Results: 023~027~00
- Search Results: grease
- Search Results: grease seals
- Search Results: lubricants sealants adhesives
- Search Results: grease lubricants sealants adhesives
- Search Results: 23~105~00
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Let’s Check Out the Dexter Electric Trailer Brakes
- Video: All You Need to Know About the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Shop: Timken Hi-Temp Red Grease for Disc and Drum Brakes - 1-lb Tub
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Grease Seals 10-36 (pair)
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs
- Shop: Brake Controller
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Q&A: Wire Gauge for the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: Feature Breakdown: Jacketed 2 Wire (Brake Wire)
- Shop: RV Roof Membrane
- Video: Complete Breakdown of the Primary Wire Heat Shrinkable Tubing
- Video: Feature Review LubriMatic LMX Industrial Strength Grease
- Video: Breaking Down the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Q&A: Wiring Wishbone Connector To Trailer With 4 Wires
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Q&A: Replacement Grease Seal for Dexter Axle Part K71-303-00
- Q&A: How to Measure Trailer Brake Drum for Electric Trailer Brake Assemblies
- Q&A: Is 14 Gauge Wire Too Small for Electric Trailer Brakes
Jesse M.
1/19/2026
Hey Ted, how did things go using the 10-gauge wire and butt connectors with your Dexter trailer brakes? Your results could really help others trying to match the right wire size for their setup.