Result: 30955

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

Hey Michael! I can definitely help you find replacement leaf springs and hardware for your travel trailer. However, we will need some more information to get the right parts. For the leaf springs, I need to know your axle capacity, as well as the…

The Dexter Trailer Idler Axle w/ Hubs part #20545I-EZ-72-10 does not come with leaf springs but we do have the correct ones for you as well as the leaf spring hangers, shackle straps, u-bolts, and everything else you need to convert to a single axle.…

It sounds like you have a spring return Bulldog landing gear jack that has a broken spring and now won't retract when you activate the release lever. I spoke to my contact at Bulldog and he said the springs aren't repairable so you would need…

Hello Jeff, Thank you so much for the pictures, they are most helpful. Yes, the Dexter Trailer Brake Drum for 12,000-lb and 15,000-lb Axles - 12-1/4" x 5" - 8 on 6-1/2 #DX34XR is the correct dexter drum to replace your Lippert Drum Drum…

Hey James, thanks for reaching out. We may have a lens cover, or at the very least a replacement light for you, but I wasn't able to find any good references for the part number you provided, so I will need to gather a bit more info from you. Any…

The alarm on the Bright Way #BW94FR is designed to go off whenever the trailer is disconnected. So as soon as it no longer senses power from the 7 way plug on your truck, it will activate the alarm. It sounds like the 7 way plug on your truck only…

The length of a fender is measured from the longest point, at the very bottom of each end across. Then the height is measured from the tallest point, right in the center. For example, the CE Smith Single Axle Trailer Fender #CE17720 is 22-1/2"…

Hi Todd, To go with trailer leaf springs that are slightly stiffer than the 4,400 lb rating of your axle you can go with 4,500 lb springs or 5,000 lb springs. The right one is going to depend on the length of your current springs though, as…

Hey Jared, I wish there was but we don't have replacement flaps for any of the 7-ways we offer including the Hopkins #30955. Only solution would be a new connector.

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…