Will Thule Accessories Fit SportRack Square Crossbars

Question

Question:

Do Thule square bar accessories fit the Sport Rack square bar rack that you sell?

asked by: Chris M

0

Expert Reply:

The accessories that state they can fit the Thule square crossbars will fit the SportRack crossbars included with the # SR1002 roof rack just fine.

The square crossbars measure 1-1/4 x 7/8 inches and per my contact at SportRack the Thule and SportRack accessories are interchangeable.

expert reply by: Jeffrey L

0

Answer 1

The correct key you will need is the Thule Replacement Key part #THKEYN038. The letter in front of the key number is not always there. In your case it is not but this key will still fit.

view full answer...

Answer 2

If the lock or key is replaceable on your SportRack cargo box, you should be able to see a 4 digit code on the face of the lock core. The code could consist of 4 numbers or it could have 3 numbers following the letter N, E or K. We should be able to…

view full answer...

Answer 3

For a replacement key for your SportRack roof rack #SR1002 you will need #THKEYN016. The keys are sold in quantities of one. I recommend getting at least 2 so you have a spare.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will Thule Accessories Fit SportRack Square Crossbars

Continue Researching