Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
Updated 05/25/2020 | Published 06/28/2016
Question:
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit?
asked by: Mac
1
Helpful Expert Reply:
Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual tire, such as # AM10002. This is a load range B tire rated for 590 pounds at 60 psi. I have linked a video review of this tire for you.
expert reply by:
Michael H
1
Product Page this Question was Asked From
Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness
- Shop: LED Trailer Combination Tail Light - Submersible - 7 Function - 10 Diodes - Red Lens - Driver Side
- Shop: Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Shop: Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Search Results: accessories and parts
- Search Results: tire valve stems
- Search Results: trailer tires and wheels
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: 2000 lbs trailer leaf springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: Breaking Down the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles
- Search Results: tires
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Valve Stem Mount Hole Diameter for the Steel Spoke Trailer Wheel # AM20124
- Q&A: Troubleshooting Center Tire Wear When Tires are Inflated Properly
- Video: Checking Out the Americana Metal, Bolt-In Valve Stem
- Q&A: How to Measure for Replacement Slipper Spring on a Cox Tent Trailer
- Search Results: 4 on 4 hub
- Search Results: slipper springs
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Shop: Suspension Enhancement
Explore Expert Info
![Our Expert]()
on Trailer Tires and Wheels
on Trailer Tires and Wheels
Raymondreddington
5/18/2020
I know, this is almost the same question as one that was previously posted, but I'm looking for confirmation as I want to do the reverse, and I am talking about tiller tires, which have a much more "aggressive" tread. So here goes... my Ariens RT8020 roto tiller currently has 4.80-8 tires on it. Will 4.00-8 tires fit the rims? What is the actual difference, are they just not quite as wide?