Do the SumoSprings Custom Helper Springs Kit # SSF-280-47 and # SSR-290-54 Come with Spacers

Question

Question:

Does the sumosprings SSF280 AND THE SSR 290 54 COME WITH THE 1/2 SPACER. Sumo say they are available

asked by: David G

0

Expert Reply:

The SumoSprings Custom Helper Springs Kit # SSF-280-47 does not come with a spacer and # SSR-290-54 does come with a 1/2 inch spacers.

expert reply by: Jameson C

0

Answer 1

The SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-290-54 are actually jounce-style springs which do not require inflation. This particular system is rated for 2,800lbs. I really like this design because it offers a completely…

view full answer...

Answer 2

The SumoSprings Solo Custom Helper Springs #SSR-290-54 are 5" tall and 4" wide. The kit does include a 1/2" spacer which is to be used during installation so you will have a total height of 5-1/2".

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Amber, for your 2005 Winnebago Sightseer 29R on the Workhorse P32 chassis we have a Timbren kit for the front axle with the part #TGMFP30W which is very similar to the SumoSprings and would work great. We do have a SumoSprings kit for the rear…

view full answer...

Answer 8

Kelly you're spot on, thanks for reaching out! Since you mentioned you have “the bar that the Falcon 2 hooks to” that tells me your current setup on the Geo Metro is using a Roadmaster crossbar-style base plate. I checked fitment for both…

view full answer...

Answer 9

Hey Donald, for the front axle of your 2019 Ford E-450 RV the SumoSprings kit part #SSF-106-47 is what you will want. This will provide the front suspension an additional 1,000 lbs of suspension support which will help with handling and sway…

view full answer...

Answer 10

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 11

Hey Robert, thanks for reaching out! The Front Axle SumoSprings #SSF-280-47 sit in the same location as the Air Lift LoadLifter 5000 #AL88101 on your 2008 Winnebago so you'll need to choose one or the other. For a no maintenance setup I recommend…

view full answer...

Answer 12

Hey Mike, I'll go ahead and list out the highest-rated front and rear SumoSprings for your 2006 Workhorse W22 chassis (which fit so long as it is 2-wheel drive): - Rear: SumoSprings Maxim Custom Helper Springs - 7,000 lbs #SSR-280-54-1 - Front:…

view full answer...

Do the SumoSprings Custom Helper Springs Kit # SSF-280-47 and # SSR-290-54 Come with Spacers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching