To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re towing or hauling heavy gear, the rear suspension can sag and throw off your steering and braking. These SumoSprings Solo helper springs add up to 1,500 lbs of support at 50-percent compression to keep your ride level and steady. They upgrade your factory suspension so weight stays balanced across both axles, helping maintain traction, control, and safe headlight aim no matter the load.
Every trip is different, and these springs adapt automatically. With lighter loads they compress easily for soft engagement and a smoother ride. As the weight increases, they can compress by as much as 80 percent to provide firm support and prevent bottoming out. The microcellular urethane cushions bumps and road vibration so the ride feels controlled without harshness.
When curves, crosswinds, or uneven cargo try to push you around, each SumoSpring works independently to keep that side planted. This helps even out off-center loads and cuts down on body roll through turns. You’ll feel more stable when merging onto highways or backing into driveways with uneven surfaces.
Long days and rough roads won’t faze these springs. The closed-cell urethane resists abrasion, oils, road salts, and UV rays, performing reliably in temperatures from -25 F to 200 F. They compress vertically instead of bulging to the sides, so they fit neatly around nearby parts without damage. With no air lines or compressors to maintain, they’re a simple, maintenance-free way to enhance your suspension’s strength and comfort.
Installing rear suspension support shouldn’t mean tearing into your truck. These custom-fit helper springs mount directly onto your existing suspension with a straightforward, no-drill setup. Once in place, they’re ready to work—no air pressure checks or adjustments needed—so you can spend less time wrenching and more time driving with a level, controlled ride.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Aiden here with etrailer. Today we're gonna be taking a look at the SumoSprings solo line of custom helper springs. This is gonna come in a variety of different fits, and have different styles of spring. So let's check them out and talk about the differences. Now right away, this is going to be for the rear axle. You can see we've got one installed on our 4Runner today.
That's just one of many fits available, and it's a direct bolt on installation. Now with the rear axle, it's gonna help with a number of things. In any sort of towing applications where we've got a lot of tongue weight on the hitch, bringing the back end down, and the front end of the vehicle up, it's going to help return us to a more normal ride height. Now, unlike an airbag that's adjustable where you can tailor it to each load independently, this is going to be pretty much fixed, but it will provide a lot more support, especially compared to the factory bump stops. Now, this is just an example, because every vehicle fit's gonna be a little bit different, but just the overall height difference between the factory and the SumoSprings option is going to be pretty drastic.
So with these being so much larger, they're going to make contact with the axle a lot quicker, so we get quicker engagement and support. So we don't have all of this open air between the bump stop and the axle, where if we hit a bump with a heavy load, we feel all of this bouncing, or side to side, we don't feel as much sway, because this may contact a lot quicker, and provides that support when we need it. And with the SumoSprings, there are gonna be multiple different kinds. If you're looking at different options, you'll see a blue, a yellow, and a black one, and they are different. They really differ in the density.
Overall function and fit, it's gonna be pretty much the same. For example, on the 4Runner here, one of these black ones is available, but also a blue one. It's gonna be the same fit, but they offer different support. The blue one is going to be the lightest density, the black one is the medium density, and the yellow is the most extreme heavy density. That just means as you get more dense, it provides more support, and all of the weight capacities, depending on the kits, will vary a little bit, but as a general rule of thumb, you can go by that color scheme to find out whether you need the light, medium, or heavy duty option.
Now these feature a progressive spring rate, and what that means is the more they compress, the more they're going to push back and support, and try to bring the vehicle back to its normal driving position. So the initial first bit of compression is going to be a bit softer and easier to move. So for normal day-to-day driving when you have these installed, it isn't going to be as stiff. Then as we get into heavy loads and we start getting pretty extreme compression, it's going to work harder to push back to that normal state, and bring us back to a comfortable driving position. Now as far as the construction goes, it's going to be a microcellular urethane material, as opposed to something like a rubber material. Now the urethane's gonna be very heavy duty. It's gonna work in temperatures from negative 25 degrees Fahrenheit, all the way up to 200 degrees Fahrenheit. So you can expect it to work in all sorts of weather conditions. And this material is going to resist all kinds of oil, road salt, and UV rays. So if it does make contact with the sun, it's not going to weather away, and any sort of road conditions, like road salt in the winter, isn't going to cause this to degrade over time. So whether you're looking for support side to side and limiting body roll in your vehicle, or you're looking for backend support for towing, or maybe just something heavy in the hitch like a cargo carrier, this is going to be a great way to do that. It's a maintenance-free solution, so you don't have to worry about maintaining air pressure in it like an airbag, although you don't get as much adjustability with it. I do think that trade-off is very much worth it, because once it's installed, you don't have to worry about it. The installation process is obviously going to vary depending on what kit you get, so do be sure to use our vehicle fit guide on our website to find the right kit for you and your vehicle. But that'll do it for our Look at This medium density SumoSprings solo line of air helper springs here at etrailer. Thanks for watching.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Here’s my true thoughts of the blue sumo spring. Here’s the pro’s for me! Shipped and received the very next day, I got rid of the air bags that never held air. The sumo install was extremely quick. Hooked up to my food trailer and truck only went down about an inch and a quarter, much better than before! Sits about 1” off the axle so I still get a good ride, and loaded with a trailer… it still actually rode good. I’m tickled with them. Now.. the con and only con… I personally think $[XX] for two pieces of urethane and four brackets and two bolts is a horrible rip off!!! But…. LOL.. I’d buy them again!
Very easy installation. The improvement in handling is phenomenal.
2024 Z71 Silverado towing a travel trailer. Prior to these springs, the truck would bounce and sag. With the SumoSprings, truck is stable and sags less. Unloaded truck drives like factory. Easy install on my own.
The Sumo helper springs were not difficult to install (had to jack up the rear a few inches) & I really do think they have helped with steadiness in towing our camper.
Would recommend.
I have had these on my 2006 Colorado for a year, great product easy install I haul a compact tractor with bucket and tiller on a single axle trailer and the truck doesn't sag. No adverse ride quality when carrying no load definitely better than installing air shocks. Highly recommend to anyone having issues with vehicle sagging when loaded.
If you want an affordable, indestructible suspension upgrade to eliminate rear sag and towing harshness—without the maintenance head-aches of air systems—the SumoSprings Solo sourced through etrailer.com is one of the smartest weekend upgrades you can make. The installation was easy and the install video they provide on YouTube is priceless.
I’ve owned these SumoSprings for a year now and love them! I installed them on a 2016 Ram 1500 Crew Cab Outdoorsman 4x4. I tow a 7x14 aluminum cargo trailer that probably weighs 4000lbs loaded with gear. Before installing the SumoSprings my axles would almost touch my OEM bump stops and truck would sag. With SumoSprings my truck rides more evenly and is surprisingly smooth on the road. The ride quality is definitely better with SumoSprings. Less body roll in corners and an overall more confident ride. When I’m not towing I don’t even know they’re there. Awesome product!
Really solid for the money. Obviously if you plan to haul a load regularly you should upgrade springs or run bags, but these were a great temporary measure for hauling my bikes out west and back in my frontier. Easy to install and do the job well; particularly noticed the difference on rough dirt roads where in the past I would have been banging on the bump stops.
The Sumo Springs worked great in my 2022 Nissan Frontier and stopped the rear from sagging under trailer load but rode like normal unloaded. Very good product and very easy to install.
This only pertains to the order, shipping speed, and install as I have not put a heavy load on these sumo Springs yet but I feel like that's a foregone conclusion based off the reviews already. The ordering process, the shipping, and the installation was unbelievably easy. I kept rereading the instructions thinking this can't be right because it was so simple. I looked at the YouTube video and realized it is that simple! So happy with the ordering process, the quality of the initial product I opened, and how simple it was to put on the jeep.
I was surprised at how much of a difference these actually make. I bought them based on some videos of others using them, but wasn't sure if they would actually make much difference in my situation. I tow a 6800lb trailer with a Silverado 1500. With the tongue weight of that trailer, the rear of the truck doesn't drop all that much and I wasn't sure if replacing the bump stops was even necessary, but when I'm on roads with "heaves" and especially bridges where porpoising can be a problem, these SumoSpring certainly help. You probably won't notice some huge drastic change, but it's just enough to matter and even out the ride to a noticeable degree. Also, they're pretty easy to install (and I'm only barely handy when it comes to this stuff.)
I've never put on a easier product. I put the jack under the trailer hitch mount. Just lifted the body 1-2 inches and used a 12 mm socket . The socket removed the old ones and I hand tightened the new on. Literally took 10 minutes and a beer.
Great product! Bought these for my 2000 7.3 f250. Didn't want something that is constantly active like ras or hellwig since my leaf springs are new and rated for 4k pounds. Installed these in 1 hr super simple only hard part was the factory bump stop on driver side was a pain. Didn't install the puck they give due to height of truck and I knew more or less at what point I wanted them engaging. I haul cattle to shows/ auctions or between pastures with my 24ft big bend and these things actually provided a smoother ride in my truck loaded then unloaded.they do a great job with the added support and are better than an overload spring with handling sway and providing a smooth ride loaded. Just wish I could use the 3k pound rated ones on this truck and my dually but doesn't fit if you have a gooseneck sadly so will probably have to go with timbs on the drw. Over all great product can't speak to longevity but solid for the time being. And customer service with this company is excellent if you have a question or problem they're on top of it...hope they pay them as well as the reputation they're building for them.
I bought and installed the 1000lb Sumo Solo springs to help alleviate rear end squat on my 2024 GMC Canyon Denali when pulling my boat. My boat trailer has a long mono tongue with no weight distribution installed. The boat weighs in at about 5500lbs, the truck fender lip measures 38” high unloaded, once I dropped the hitch down on the ball and the Sumos picked up the load, the fenders measured 36.25” equating to an inch and 3/4 squat. Empty the Sumos have an apx gap of 7/8” above the frame rails. The Sumos were recommended over the Timbrens for my situation of infrequent towing with this truck and to maintain the best ride possible when not towing. So far my ride is virtually unchanged when empty and feels controlled when towing. Installation is straight forward but the instructions could be a little clearer with a diagram showing the intended location of the springs. Luckily an etrailer customer had already done the install and provided some pics so there was no question. I chose to remove the tires to have good access and I’d do it again this way. I supported the truck with a jack stand under the receiver. IMHO the proper method to locate the over frame upper clamp brackets is to push the forward clamp as far forward until it contacts the bed stiffener and you’ll be in the correct location then let all the hardware hang to position itself, tighten as required and enjoy.
Installed these right before a long road trip, and were impressed with how much the ride improved. Opted not to include the spacers, which has worked out fine. While not towing have not noticed any change to the ride, which is good. When towing the steering has a solid grip on the road now (sometimes felt a little loose before installing these) and no more issues with 'porpoising'. We drove across a several mile long bridge in the Bay Area that likely would have been a roller coaster ride previously, and had no issues. Quick and easy to install.
Put these on a Jeep Gladiator to haul a motorcycle to Sturgis. Kept everything level, good ride and stability. Highly recommend.
I had installed this model SumoSpring on my 2019 4Runner and had great results when towing the camper I had at the time. They greatly reduce the bounce when going over dips in the road at highway speeds. Now I have a 2021 Titan and a bigger heavier camper. I expect the same great results on the Titan. Installation was pretty straight forward and took about a half hour. The size difference between the OEM bump stops and the SumoSprings alone should give a better ride when towing my camper.
Product is great, exceeded my expectations. Install is simple and straightforward. It’s a night and day difference in both the body roll and the handling small bumps all the way up to off-road conditions.
Love them! The truck barely even squatted, had two dirt bikes, and a generator in the bed as well! It handles the bumps and sway great
I got the springs installed last week and wanted to have a drive time before I wrote the review.
The height of the springs are perfect for my 2016 Tacoma, They keep the truck stable and nearly eliminate the body roll I had before installing them. I am heading to the mountains in a couple weeks, so I will update the review when I get back. That way I will know for sure the body roll is gone and the truck is stable on the winding mountain roads.
The springs installed in no time at all and since I had the rear end apart, I decided to add the leveling blocks at the same time, to keep the truck from squatting with the gear I haul around with me.
The guys at etrailer are great. And while I did not call them to discuss this item, they have been very helpful in the past with all my questions.
Below are pictures of before, a couple comparisons and after. Sorry if they come out sideways.
These Sumo Springs were a great addition to my Tacoma and well worth the money, IMHO.
Opted for the Blue 1000lb Sumo's w/spacer over the 1500lb Black ones. 1500 Silverado Max Tow & reduces squatting by 2" on a 1000lb+ tongue weight. Ride is still good, but you can feel the Sumo's engage over large dips or bumps which is not an issue for me.
2025 Promaster 2500 159” wheelbase. Backed the van on couple 2” X 6 “ easier sliding under. Sprayed PB Blaster on top of bumper spring, using a 16” Channel Lock, easy off with the old. At that time I jacked the rear end to allow clearance. One side at a time. Took longer for set up then the job. I used the long bolt with two spacers. Have not drove yet, though looking for great results.
I put these on a 2013 Jeep JK (not lifted) that tows a 3000 lb trailer in rough terrain; Total game changer.
These replaced the anemic factory stops (which had completely disintegrated) and make it impossible to 'bottom out' on the dips and holes that use to beat up the suspension. I got nearly all of my vertical travel back and the vehicle now sits almost level under high tongue load.
They go on pretty easy. I suggest sliding in one side, and then using a wooden dowel and hammer to pop the other side in the stock receiver cup.
Highly recommended. These are a MUST if you are towing a trailer (with a medium sized SUV) of any significant weight or if you just want to be able to bounce hard without bottoming out your suspension. I am likely going to get the front suspension version now as well.
Wish I knew these existed sooner.
These really help with heavier loads!
This was just what my little city express needed. I have used them in my 3500 express vans as well, and love them. They smooth out the ride when you are loaded, as they are taller, so you don’t have the hard jarring when you would hit the short stock bumpers. If your unloaded you might still get that, but my truck is always full of tools, so not an issue. Install in the city express took about 15 minutes once I backed it up on ramps. Super simple.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.