How Big Is The SumoSprings Solo Custom Helper Springs # SSR-290-54? -290-54

Question

Question:

How tall is SSRR -290-54

asked by: Ernie

0

Expert Reply:

The SumoSprings Solo Custom Helper Springs # SSR-290-54 are 5" tall and 4" wide. The kit does include a 1/2" spacer which is to be used during installation so you will have a total height of 5-1/2".

expert reply by: Bud M

0

Answer 1

The SumoSprings Custom Helper Springs Kit #SSF-280-47 does not come with a spacer and #SSR-290-54 does come with a 1/2 inch spacers.

view full answer...

Answer 2

The SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-290-54 are actually jounce-style springs which do not require inflation. This particular system is rated for 2,800lbs. I really like this design because it offers a completely…

view full answer...

Answer 3

SumoSprings Solo Custom Helper Springs #SSR-290-54 will fit your 1996 Chevrolet P32 and they are for the rear axle. If you axle need suspension enhancement for the front axle you can use the Timbren #TUF100.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

How Big Is The SumoSprings Solo Custom Helper Springs # SSR-290-54? -290-54

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching