bing tracking image
  1. Vehicle Suspension
  2. SuperSprings Intl
  3. Bump Stops
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Standard Duty
THIS ITEM IS NOT A FIT FOR
2023 Hyundai Palisade
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SuperSprings Intl

SumoSprings Solo Custom Helper Springs - Rear Axle

Part Number: SSR-290-54
In Stock
$287.99
Vehicle Suspension
Not Confirmed to Fit

2023 Hyundai Palisade

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation. Great Prices for the best vehicle suspension from SuperSprings Intl. SumoSprings Solo Custom Helper Springs - Rear Axle part number SSR-290-54 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2548)
  • Q & A (0)
  • Photos

SuperSprings Intl Vehicle Suspension - SSR-290-54

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 2,800-lb Load Support: Levels your ride so steering, braking, and headlight aim stay consistent.
  • No Maintenance Needed: No air lines or pressure checks—just install once and drive.
  • Smoother Ride Over Bumps: Cushions shocks and keeps things steady when roads get rough.
  • Handles Uneven Loads: Each spring works on its own to cut body roll and balance side-to-side weight.
  • Built for Tough Conditions: Microcellular urethane resists oil, salt, UV rays, and temps from -25 F to 200 F.
Made in USA

Features to know about

Stay Level and Confident: 2,800-lb Rear Suspension Support

Heavy loads in the back can make the rear end sag and throw off your steering and braking. These SumoSprings Solo helper springs add up to 2,800 lbs of support at 50-percent compression to keep your ride level and controlled. They help even out the weight on all four tires so your traction stays steady and your headlights aim correctly when you’re towing or hauling.

Comparison of SumoSprings Solo Custom Helper Springs installed on a vehicle rear axle, showing side-by-side views of compressed and uncompressed springs to demonstrate load support performance.

Smooth Out Bumps and Rough Roads: Progressive Load Control

Road bumps and uneven pavement don’t have to mean a harsh ride. The microcellular urethane springs compress easily under lighter loads for soft engagement, then stiffen as the weight increases—up to 80 percent compression—to handle heavier cargo. The result is a smoother ride when empty and solid support when loaded down, without constant adjustments or air pressure checks.

Stay Steady in Crosswinds and Turns: Independent Spring Action

When cornering or dealing with an off-center load, each side of the SumoSprings moves independently to balance the vehicle. This helps reduce body roll and sway so it feels stable through turns, in crosswinds, or when you hit uneven ground. You’ll notice better control whether you’re pulling a trailer or carrying a heavy load in back.

Set It and Forget It: Maintenance-Free Design

There’s no tubing to run or air to monitor—these jounce-style springs are completely maintenance-free once installed. The high-density microcellular urethane resists oils, road salts, and UV rays, working reliably from -25?°F to 200?°F. They compress vertically with minimal side expansion, fitting tight spaces without interference from nearby components.

Install It Once: Simple No-Drill Mounting

Adding extra suspension support doesn’t need to take all day. The custom-fit design replaces your factory bump stops using a simple no-drill installation. With two jounce-style springs and a ½-inch spacer included, you get straightforward setup that levels your ride without complicated hardware or air systems to maintain.

Specs

Weight and Capacity

  • Weight capacity (at 50-percent compression): 2,800 lbs

Warranty

  • Limited lifetime warranty
  • 30-Day satisfaction guarantee

SSR-290-54 SuperSprings Sumo Springs Solo Rear Vehicle Suspension Kit

Replaces SSR-290

Installation Details SSR-290-54 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.7

2548 reviews
5 Stars
(2061)
4 Stars
(331)
3 Stars
(54)
2 Stars
(38)
1 Star
(64)
Review Sort Icon
by:
These was just what my rig needed . I am now able to take curvy roads without feeling out of control. Windy weather travels are much less stressful. Worked perfectly.
Rodney profile picture

Rodney

4/20/2026

The sumosprings worked great. Minimal swaying going down the road now. The price seemed a bit expensive at the time for two polly springs but paid for themselves right away.

by:
1998 Chevy P30 chassis witj Fleetwood Pace Arrow. Really made a difference in road sway. Now need to get same thing for the front end
by:
2003 Workhorse P Series
I tried airbags but they wouldn't work on my p32 frame. The sumo springs were just what I needed and rv feels much more solid. Even towing a 29 ft box trailer.
by:
Straight forward installation once original snubber / damper was removed...less than an hour to complete both sides. Body lean was noticeably improved when cornering.
by:
Good quality, clear instructions and fast shipping
Moby profile picture

Moby

2/12/2025

Still lookin good after a year. So much better handling especially on big bumps.

Bryce D. profile picture
Etrailer Expert

Bryce D.

2/13/2025

@Moby Glad to hear it!
by:
I waited until I could drive the MH to rate this purchase. They were super easy to install. This difference was subtle but noticeable. Less body roll in corners and in windy conditions. This also resulted in better steering and a more relaxed drive. Well worth it!
Steven profile picture

Steven

9/29/2024

Works great. Just drove 11 hours round trip and the motorhome handled very good.

by:
I installed these on my Fleetwood Terra 32' Motorhome. It is built on a Workhorse P32 chasis. All I can say is that the improvement in cornering and sway from wind or trucks passing is unbelievable. These were installed in combination with the Roadmaster return to center steering stabilizer. I highly recommend both for anyone wanting to upgrade their coach to handle like it should have from the factory.They made the coach drive like a large SUV. No more pucker factor.
by:
Great service arrived in 3 days. Installed the Sumo springs last weekend. It was about a 15 minute job on a P32 chassis. I used the supplied spacers and it raised the rear end about 1/2 inch and really reduced the body roll. They replaced the stock rear jounce bumpers which were shot. This is what should have come on the motorhome from the factory.
by:
Picked them at the mail box, 30 minutes later I had them installed. Course I already had the RV jacked up and wheels remove with anticipation of the sumo super springs arriving. Now I hope they work.
by:
Arrived as promised,extremely well built product,well give a full reveiw when I use the motorhome again.
John H. profile picture

John H.

8/29/2014

This is a must have product,was an easy install and has performed flawlessly for the past year.With the quality of this product cannot imagine ever needing to replace them. John H.

by:
1993 Chevrolet Kodiak
by:
I’m happy that I installed these. The rig settles in a turn sooner and does not porpoise through the turns any more. Jounce settles sooner. Didn’t get much improvement in straight line tracking. Overall, the rig is more Moe as ant to drive.
by:
1998 GMC C/K Series Pickup
These were installed on a GMC dually that is now carrying a 11 foot long camper. They worked perfectly and install was relatively easy.
by:
I did not do a lot of traveling with it this summer but they seemed to help with what I did.
David profile picture

David

11/13/2022

They are working good. I think it helped with reducing the push you get from passing semis. I was not able to do much driving in less than 15 mph or more sidewinds this summ but I think they halped with the lean,

by:
1994 Chevrolet P Series
1 1/2 hours after delivery I had them installed motorhome sits so much better.
by:
Looked like the product was unpackaged and used.
Katrina B. profile picture

Katrina B.

10/14/2022

I am sorry that these springs did not show up to your expectations. We do not sell any returned or used items. However, we do have a demonstration team that takes our product and does a temporary installation in order to get videos and pictures of the item in use. It is our policy to make sure that the item is still in good or new condition before it gets put back on the shelf for sale.

by:
Very easy install. I had sprayed penetrating oil on the old one the day I ordered these, and they came right off.
On my RV they raised the ride height almost an inch at the axle, I would have preferred they were a bit taller.
I have not had a chance to drive it much since installing to comment on that.
by:
Much much smoother ride. Highly recommend
by:
Easy install works great
by:
GREAT PRODUCT, AND WONDERFUL SERVICE AS ALWAYS.
by:
by:
by:
by:
2025 Promaster 2500 159” wheelbase. Backed the van on couple 2” X 6 “ easier sliding under. Sprayed PB Blaster on top of bumper spring, using a 16” Channel Lock, easy off with the old. At that time I jacked the rear end to allow clearance. One side at a time. Took longer for set up then the job. I used the long bolt with two spacers. Have not drove yet, though looking for great results.
Lazer S. profile picture
Etrailer Expert

Lazer S.

5/13/2026

Glad to hear the install wasn't too bad, Michael! Definitely let us know how the ride is once you take it out for a drive! What are you using your Van for? The tires look pretty beefy.

by:
2020 Jeep Gladiator
This only pertains to the order, shipping speed, and install as I have not put a heavy load on these sumo Springs yet but I feel like that's a foregone conclusion based off the reviews already. The ordering process, the shipping, and the installation was unbelievably easy. I kept rereading the instructions thinking this can't be right because it was so simple. I looked at the YouTube video and realized it is that simple! So happy with the ordering process, the quality of the initial product I opened, and how simple it was to put on the jeep.
Claire H. profile picture
Etrailer Expert

Claire H.

9/1/2026

That is the beauty of SumoSprings! Super easy to install and once they're on you can forget they're there! Are you planning on towing something with your Jeep that you want extra support for?

Justin profile picture

Justin

9/1/2026

@ClaireH yes Ms Claire. I plan to put a truck camper on the Jeep (that weighs in the 500-1000 lbs range). My payload is 1700 lbs so I know a camper of the weight will be significant my truck. Already ordered a stiffer rear anti-sway bar as well.
Claire H. profile picture
Etrailer Expert

Claire H.

9/2/2026

@Justin That sounds like a good plan! These SumoSprings plus the sway bar should be more than enough to handle the weight of your truck bed camper.
25
2548
true
Show More Reviews

See what our Experts say about this SuperSprings Intl Vehicle Suspension

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video Edited:
Dustin K
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Mary K
Written by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee Robert C
Installed by:
Robert C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.