Recommended Spindle And Hub Assemblies For 1-1/2 Inch Square 2,000-Lb Axle
Updated 01/25/2016 | Published 01/23/2016
Products Featured in This Question
Question:
I have a 1 1/2 3/ 16 gauge square tube for a axel and the inside to inside measures 1 1/4 . What size spindle could I use to work with this for a 2,000 lbs capacity?
asked by: Ricky A
Expert Reply:
The spindle that you referenced, part # TRU47FR, will work great for you. This spindle features a 4 inch long stub, and is rated for a 3,500-lb axle. I have attached a link to a product review video for this spindle you can check out. The installation of this spindle should be done by a qualified professional welder because it is important that the spindle is welded in place as square and concentric as possible.
The hub assembly designed to work well with the TRU47FR spindle is part # 84545BX. This hub includes bearings, part # L68149, races, seal, grease cap, wheel bolts and lug nuts, and has a 5 on 4-1/2 wheel bolt pattern.
Another spindle that works with your 2,000-lb axle is part # TRU97FR. The hub assembly that will work with this spindle that I recommend is the Dexter Trailer Hub Assembly, part # 8-258BTUC1. This hub assembly comes with the lug nuts, bearings, part # L44643, races, grease cap and grease seal. This hub has a 5 on 4-1/2 wheel bolt pattern and is designed for a 2,000-lb axle.
I have also attached a link to a helpful article that explains how to determine the bolt pattern of your wheel.
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Video: Square #84 Spindle for 3,500-lb Trailer Axles: The Breakdown
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Recommended 2200lb Axle To Replace Damaged Axle On Karavan Dual Jet Ski Trailer
- Q&A: How to Measure for Replacement Axle on Dual PWC Trailer
- Shop: Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Top Rail Trim for Enclosed Trailer Review
- Shop: Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 1-1/4" Hitch - 3-7/8" Rise - 3,500 lbs
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Measuring To Choose The Right Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Brake Controller
on Trailer Spindles
