Dimensions of CR Brophy 3 Step Scissor Steps # SS03 Folded Up

Question

Question:

I was looking at product SS03 and similar step products, 2 step, 3 step, 4 step I wanted to know the dimensions of the steps when it is collapsed to know the storage requirements. The weight would also be helpful

asked by: Jeff T

0

Expert Reply:

I went out to the warehouse and pulled part # SS03 and took some measurements for you. (See image). The steps are 9-1/2 x 18-1/2 x 9-1/4 when folded.

According to my contact at CR Brophy, the actual weight of the # SS03 scissor steps is 29 lbs.

expert reply by: Chris O

0

click to enlarge

Christine

7/24/2024

These steps sound great, but I'm concerned about the weight. Are there any lighter ones?

Reply

Answer 1

The Handrail for Second Generation 4-Step MORryde Steps #MR73AR is designed to be used with the StepAbove steps. Unfortunately this rail will not work for your MORryde Flip Tread RV Steps #MR42UR. That being said, the best solution is to add a…

view full answer...

Answer 2

The Aluminum Scissor Steps #AS03 that you referenced weigh 15 lbs and the Scissor Steps #SS03 weigh 29 lbs. As you can see, aluminum is much lighter.

view full answer...

Answer 3

We have a couple of 4-step scissor stairs you could use. We have a steel model, #SS04, and an aluminum model, #AS04, and both are 18 inches wide. These stairs mount using an included bracket that looks like #AS2002. So they do not pin into place.…

view full answer...

Answer 4

Steps like the Scissor Steps #SS03 come with a bracket that gets permanently mounted to the camper, but the steps themselves get removed while traveling.

view full answer...

Answer 5

Your 2016 Wildwood camper was made by Forest River which typically uses Lippert frames, so the Lippert pull out steps part #LC432682 should work well for you. However, you can measure your current steps and compare them to the dimensional pictures I…

view full answer...

Answer 6

Hey Luis! So long as your Keystone has flat fiberglass walls then yes the MORryde Short Safe-T-Rail Telescoping RV Hand Rail item #MR54RV will work with your 5th wheel trailer. It is not designed to be used on corrugated steel walls. This rail…

view full answer...

Answer 7

They definitely can Luis! The Ground Control systems are the most convenient, easiest to use leveling systems available, and allow you to level your 5th wheel by pressing a button. The only thing you'll have to determine is which set-up you need,…

view full answer...

Answer 8

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 9

The largest Brophy Camper Scissor Step Assembly we currently have available is the 5-Step #AS25. These are 8-3/4 inch deep and 24 inch wide aluminum camper steps that can expand from 40 inches to 48 inches tall. The mounting bracket and hardware are…

view full answer...

Answer 10

The Camco RV Heating Wall Thermostat #CAM09231 can be mounted with our without the base plate adapter.

view full answer...

Answer 11

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 12

Hey Patrick, thanks for reaching out! It sounds like you're needing the Progressive Dynamics 4000 Series Mini RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4045KA. If you're wanting just the converter part then the Progressive…

view full answer...

Dimensions of CR Brophy 3 Step Scissor Steps # SS03 Folded Up

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching