Hot-Line LED Utility Light Bar Review Video

Hey Rodney, it sounds like you've done your homework! That MoRryde set up you referenced is definitely going to upgrade your Dutchman's suspension and make towing it more comfortable. You'll want to take two measurements before ordering…

Hey Luis, We can answer both your questions in one as yes, you can change from the CRE3000 to AllTrek 4000, and it's definitely an upgrade worth making, as the AllTrek 4000 is better in a couple ways from the CRE3000. The first is the 4000 is…

For the replacement Vista Lippert Light you have you'd need the part #LC24PJ.

Since your system is compatible with both the 7" and 5" monitors, you can use either the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision #FCE48TASL-05 for the 5" kit or #FR98NR for the 7" kit. The camera is not…

The problem that some people have with the Fulton F2 jacks such as #F1413040134 is that they are not used to seeing plastic pieces on a trailer jack. If you are rough with a piece of plastic, it can break. But at the same time plastic is not going to…

Your Trailer Vin should be able to give you the year it was manufactured. If your Vin is the 17 digit traditional format post early 1980's, then the 10th digit will give you the ending digit of the year it was manufactured. I've attached a…

We can definitely help install a brake controller and 7-way on your 2024 Toyota Grand Highlander but first the brake controller I recommend is the Redarc Tow Pro Liberty part #RED24FR with the install harness part #RED69FR. As this controller puts…

I went out to the warehouse and pulled part #SS03 and took some measurements for you. (See image). The steps are 9-1/2 x 18-1/2 x 9-1/4 when folded. According to my contact at CR Brophy, the actual weight of the #SS03 scissor steps is 29 lbs.

The first thing you need to do is look for any axle tag or etched axle number on the crosstube itself. Sometimes this information is inside the axle hubs if the axles came as a complete assembly. The axle information can also be found on any…

Yes, the center pin for the 7-way trailer connector on your 2018 Ford F-150 is for the reverse light circuit. If the vehicle is placed into reverse then the pin will become active and send power to the trailer. I have attached a selection of our…

I do have a really similar option that will work great, however the Optronics Thinline LED Utility Light #UCL59CB that you referenced can't be used as a backup light on your trailer. This is simply because the light doesn't meet DOT…

In regards to light output, the Hot-Line LED Trailer Backup Light part #328-003-6017W will physically put out more light than the reverse light portion of the GloLight LED Combination Trailer Tail Light part #STL161RLB as it has twice as many diodes…