This 15-1/4" long amber LED light bar is built for clear, reliable signaling every time you hit the brakes or make a turn. It uses 13 premium LEDs that put out bright light while drawing less power than old-school bulbs. Rated for up to 100,000 hours of use, it doesn’t have filaments that burn out or break. Once it’s wired in, you can count on bright visibility and low maintenance for the long haul.
This light bar is designed to handle water exposure without a problem. The housing and lens are fully sealed as one waterproof unit, so no moisture can sneak in to short out the circuit board or corrode the diodes. It’s completely submersible, which means it performs just as well on wet roads as it does when dunked during a boat launch. You get dependable lighting even in harsh or wet environments.
Mounting this light bar is simple thanks to its surface-mount design. Measuring 15-1/4" long x 1-1/4" tall x 1/2" deep, it lays flat against the trailer surface and only needs a small hole for wiring. The 13-13/16" center-to-center mounting holes make it easy to line up and secure with your own hardware. It can be installed horizontally or vertically—whichever works best for your layout.
Hookup is straightforward with a 3-wire pigtail that connects quickly into most trailer lighting setups. The white wire handles ground, the brown wire runs the light, and the yellow wire signals turns. It runs on standard 9V–16V DC systems and can even tie into existing incandescent circuits if needed. With 7" wire leads, there’s enough length to make clean connections without extra fuss.
Durability comes standard with this one. The base is made from tough polycarbonate and topped with an acrylic lens that resists cracking and fading over time. That combination keeps the light looking good and performing reliably through vibration, road spray, and UV exposure—exactly what you want from a trailer signal bar that’s meant to last.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a Hot-Line LED trailer light. This trailer light functions as a clear insert side marker light and turn signal light for your trailer. LEDs make great replacements for incandescent lights, they last longer, burn brighter, and they're more efficient. With LEDs you don't have to worry about replacing bulbs or worry about brittle filaments. This unit has a nice polycarbonate lens and housing. It's very strong and durable.
It's got the nice amber lens with a three wire pigtail, so white is your ground wire, brown is your taillight wire, yellow is for your turn signal. It mounts directly on the surface of your trailer. You have a mount hole here and a mount hole here, mounting hardware not included. This can be mounted horizontally or vertically. It's SAE and Department of Transportation compliant, and the product is made in the USA.Taking a look at the measurements, and then we'll show you what it looks like with power running to it.
The overall length from edge to edge is about 15 1/4 inches. Measuring this way, edge to edge is about 1 1/4 inch, and the overall depth or thickness is about 1/2 inch. It's a nice low-profile unit.We're going to go and hook up to power and then we'll also turn off our overhead lights so you can see it in a lower light setting. Again, white wire is my ground wire, brown is my taillight wire and red is my turn signal wire .. excuse me, yellow is my turn signal wire.
You can see here it sends out a nice consistent signal. This is the taillight function. When we apply our turn signals you can see how that signal output increases, which definitely makes the unit more visible. The LEDs run the full length of the strip here, so it has multiple LEDs or multiple diodes, which really helps optimize the overall light output of the unit.That's going to do it for today's look at the Hot-Line LED trailer light.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Works great
Good job
Looks like good product reasonable price thanks
just what I needed.
Received order in a very timely manner, all items were very
Looks good, exactly what I was expecting, can't wait to install them
Very well built and well worth the cost. Excellent product
Always love the quick service I get from etrailer! THANKS again!
Received my order way faster than I expected, and the products were the quality I expected.
Ordered 50 amp extension cord, mud flaps and several trailer lights. Everything works perfectly and the order showed up early. Excellent service and products! Can’t go wrong with this place.
got these light before the delivery date and look good and work great. I don't have pics at this moment as I am refurbishing the trailer with all the items I got from etrailer, but I will repost with before and after pics.. I did wire them up just to see what they look like in the dark.. wow bright.. thanks etrailer gals and guys..
Light is great. Listing for light does not clearly specify that it is a RUN light as well as TURN SIGNAL. Only assumed so from seeing 3 wires and watching video. It would be an advantage if all lights sold had gaskets to waterproof light to mounting surface.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.