Result: backup trailer lights

Hey Josh, we do also have the Aluminum Bearcat Trailer Wheel which is the same size wheel as the Aluminum Lynx Trailer Wheel #LI44FR but it's in a gunmetal grey color, which looks pretty cool if you ask me. But unfortunately, all the 17-1/2"…

The Jeep-Style Trailer Combination Tail Light #ST60RB, which is an incandescent light, does not have two separate versions, one for the driver side and one for the passenger side. If you wanted to go with the higher-quality LED version of this light…

The Jeep-Style Combination LED Tail Light w/ Backup Light and License Plate Light - Driver Side #STL60RLBP and Passenger Side #STL60RB are not intended for use on a Jeep. They are simply the Jeep Style and are intended for trailer use. You will not…

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

According to Dexter, this is a 3,750 lb torsion axle with a 90.3" hub face measurement. More than likely your axle uses #L68149 and #L44649 bearings with a #168255TB grease seal. You will need to verify this information since Dexter did not have…

Yes it will! The Rubber Bumper #C45921 is a direct replacement for the Curt Adjustable Ball Mount #C45900 but the only differences between the shank that comes with that system and the Replacement Shank #C45917 that you referenced is the weight…

The Kodiak Wheel Bolt - 9/16" Diameter x 2-1/2" Long #K916WB25 can replace your 5/8 studs as long as the knurl diameter and length work for your hub and wheel. For instance, the Kodiak Wheel Bolt - 5/8" Diameter x 3-1/8" Long…

We can get you set up to add back up lights and a 7-way to your boat trailer, and I'll go over what you'll need. Let's start with the back up lights, and for your boat trailer you'll want submersible lights like you said, the GloLight…

The Gen-Y Torsion 2-Ball Mount #325-GH-1224 would work for your application but I recommend the Gen-Y Torsion Weight Distribution Shank #325-GH-1202. This is made specifically for use with a weight distribution system and would basically replace…

For your 2020 Chevy Express Van the slip-on tow mirrors I recommend are the Longview part #LVT-1700. These are custom fit for the mirror housings of your van which means they'll install very easily and be very secure. They also greatly improve…

Unfortunately I have no insight on what Ranger Trailer put on their boat trailers in 2006. All I have to go off is images I could find which looks like they use the Amber #MCL52AB or #MCL52AMB and Red #MCL52RB or #MCL52RMB. The difference is the…

The magnet should only make contact with the inside of the brake drum when power is applied to the magnet. If it is making contact with the drum all the time, you may have residual power running on the brake wire that is just enough to cause the…