bing tracking image
  1. Accessories and Parts
  2. Lippert
  3. Camper Jacks
  4. Trailer Jack
  5. Legs
  6. Driver Leg
Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin
Lippert

Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin

Part Number: LC179013
In Stock
$231.17
Retail:$285.95
You Save: $54.78
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
1-800-940-8924 to order Lippert accessories and parts part number LC179013 or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (132)
  • Q & A (0)
  • Photos

Lippert Accessories and Parts - LC179013

  • Camper Jacks
  • Trailer Jack
  • Legs
  • Driver Leg
  • Lippert


  • Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This replacement lead landing gear drop leg and snap pin will get you back to camping and enjoying the great features of your power landing gear. This kit includes the landing gear lead leg and snap pin and is easy to install with minimal assembly required.
  • Kit includes landing gear lead leg and snap pin
  • For use on LCI Power Landing Gear assemblies
  • Easy to install
  • Minimal assembly required
  • Black powder coat finish is corrosion resistant
  • Grease zerk fitting makes maintenance easy
  • Made in the USA
  • Weight capacity:
    • Manual crank: 4,000 lbs per leg
    • Single motor: 2,500 lbs per leg
    • Dual motor: 4,000 lbs per leg
  • Overall height: 32"
  • Outer tube width: 2-1/2"
  • Inner tube width: 2-1/4"
  • Outer tube height: 29-1/2"
  • Travel distance: 21"
  • Drop leg travel: 16"
    • Can be adjusted in increments of 1", leaving the bottom hole for installation of footplate
  • 1-Year limited warranty


179013 Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin




California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

132 reviews

by:

One of the landing gear legs on our 2021 Genesis Supreme Vortex 3016VF failed, and this worked perfectly as a replacement for that leg. The part seems to be good quality, but only time will tell if it lasts. Word of advice when you’re installing this just hook your trailer up to your truck that’s going to be the safest and easiest way for you totake off the old leg and put in the new one. It should be a fairly simple swap that you only need basic tools for.



by:

So far the landing gear and gear box work good. The lead leg tabs were a little off and didn’t want to fit right. A little file work and I was able to make it work.



by:

Exactly what I needed. I was able to install it with no issues.



by:

Perfect fit



by:

fits perfect and easy intall



by:

The parts were exactly what I ordered and better than the OEM parts. It took only an hour to replace the OEM landing gears.



by:

the landing gear drop legs look good they even have grease fittings for the gears and shafts the original ones did not . I will install them in about a week . the price was very good they were on back order but worth the wait thanks paul

Paul K. profile picture

Paul K.

6/15/2016

legs work great very good product



by:

Product shipped fast. As per some reviews I had to modify the tabs to get it to fit. I ground off about 1/16" with a cut off wheel on my die grinder. This leg works great and comes with 2 zerk fittings which my OEM did not have. The zerks are better than nothing but I used a piece of PVC packed with grease to lube the jack screw.

Russell profile picture

Russell

9/20/2020

Still working great!



by:

Great experience from start to finish! Bryan provided competent professional customer service. The items arrived sooner than I expected and were a perfect fit for my RV. Installation was easy and quality of the parts is superb. I am a huge fan of etrailer.com!

Michael profile picture

Michael

4/20/2020

The parts have been on the RV for a year now and still work perfectly!



by:

Great service and timely delivery and Thanks Steve Z for helping me pick out the parts I needed for my Trailer. The Jacks fit perfectly

Sammy profile picture

Sammy

3/21/2023

No issues at all. Still working fine



by:

Good product easy to install, perfect fit for my trailer. Also gas 2 zerk fittings for grease.

Guy N. profile picture

Guy N.

1/24/2018

Still working great



by:

Everything fit and works perfect, excellent customer service over the phone. Would definitely buy from etrailer again

Stan O. profile picture

Stan O.

12/18/2017

Thanks...and a Merry Christmas....it has been working without fail....



by:

I ordered the complete landing gear for my 2006 Thor 5th wheel. As I have always in the past been satisfied with the quick service and quality of the components. Installation was pretty straightforward. I will continue to order all my hardware from etrailer as done in the past. Great customer service over the phone and quick delivery of the parts.



by:

The lead leg went on our 2006 Keystone Montana Mountaineer and was an exact fit. Order just the gears but before came realized needed to replace whole leg. Called and spoke with customer service and sales, they sent me a return slip and my item was returned per their policy with no problem. They were very helpful and knowledgeable, to help me get what I needed for sure. Product arrived quickly, easy installation, and now ready to enjoy summer. Ordered from etrailer before, they are a wonderful, knowledgeable company to keep our equipment operational. They get a A+ for customer service.



by:

Have purchased from etrailer off and on for several years. Have always found the products to be good quality, reasonably priced, and shipped promptly. Thanks!

Clyde profile picture

Clyde

12/8/2018

Working great!



by:

I had to weld a 5/8” piece a flat steel above the lower weld stop in order to fit my 5th wheel but any replacement jacks would have required this modification. There are 2 grease zirk fittings and fortunately I can easily get to them. Just a quick bolt in replacement.



by:

I called my order in so I could ask the questions to make sure it was the correct piece. Nick was very astute and understood how to help me! I first found this part without grease fittings, but she'd if I could put them in. Then, Nick found me this that already has them!
Ordering was easy. Free shipping got it here in a few days, on time. Install was easy. Popped in just like the old one popped out.
The only issue: my old one had a bracket welded onto it that would push up against a flat bracket on the trailer post. This new one did not. I'm not sure if it is necessary since this new one didn't come with it? But I cut the old one off and welded it onto this one. Took an extra half hour. Fortunately, that was easy for me... But if you don't have a welder? Just make sure to ask if it is truly necessary?!
Other than that, very pleased with their service and the product with as soon as it was installed. I'll update if it breaks early...



by:

I ordered 2 jacks to replace on my fifth wheel camper, one jack didn’t have any grease in it and was not easy to move up and down causing my gearbox to break so hard to replace the gearbox and it still doesn’t go up and down very easily. Not very happy with the jacks.



by:

This was a great purchase to replace the existing front end camper jacks. Replacement was very simple and operation is very smooth.



by:

The landing gears have work flawlessly. I have lubricated them once with Valvoline Multipurpose Grease #615.

Ron H. profile picture

Ron H.

5/5/2018

The 5th wheel landing gears are doing great!



by:

Legs were a perfect replacement for the old ones in my trailer. Got them back in a couple hours and had the trailer back on the ground and no issues. These were a great replacement as well because they include grease zerks to keep the gears internally greased while the old ones did not which is probably why they went bad.



by:

Landing gear has been installed for over a year and continues to function. Still quiet too.

Tom profile picture

Tom

8/11/2020

Still working fine, and it had a workout this year visiting every western state except AZ over a 10 week period. Lots of raising and lowering...



by:

On my 5 whl the landing gears froze up and would not turn either way. I ordered LC179013 and installed myself. That was s good job for an old 70Yrs fat man to do..
I got them installed and wired up and they work like a champ. That has been over a year ago and have been used alot.



by:

I bought these quick release pins along with a new landing jack. I haven't installed them yet, but they appear to be exact replacements for the slightly damaged jack on one side of my 5th wheel. Shipped quickly and I received them within about 5 days from order.



by:

This product is better to me than the original. I Needed to replace the power leg in order to get my truck unhooked from the fifth wheel.
This product is a excellent fit and the grease fitting will save someone from gear failure and of course the hard part of having to replace the leg.


25
132
Show More Reviews

See what our Experts say about this Lippert Accessories and Parts

  • Replacement Landing Gear Legs Needed for a 2004 Arctic Fox 29.5E 5th Wheel Trailer
    I can give you some information to help you determine if the Lead # LC179013 and Follow # LC179014 legs will fit your 2004 Arctic Fox 29.5E 5th wheel, but we don't really have a database to pull from when it comes to OEM part numbers on trailers. Both legs have an overall height of 32" with an outer tube width of 2-1/2" and an inner tube width of 2-1/4". The total travel distance is 21" with a 16" drop leg travel. To determine if these will fit directly to the brackets that you currently...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Landing Gear Legs for 1995 Jayco Designer Series 5th Wheel Trailer
    It looks like your 1995 Jayco Designer Series 5th Wheel Trailer was equipped with an Atwood landing gear system. Atwood was recently bought out so their products are getting harder and harder to find. To replace both the legs on your system the Lippert # LC179013 Lead Leg and # LC179014 Follow Leg should work great. These feature standard weld stop measurements of 15-1/2 inches from inside to inside and 17-1/2 inches from outside to outside. You will just want to compare this to your...
    view full answer...
    Image 1 for
  • Troubleshooting Lippert Landing Gear Lead Leg Not Fully Retracting
    It doesn't sound like the gears to me because you are able to retract all but the 2 inches, so I don't think the Lippert Components Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059 will solve your problem. If the gears were bad, you'd be simply stuck or have slipping as you retract every full rotation. It sounds to me like the main threaded screw is stripped at the point it stops retracting. There is not a replacement for that part, so I recommend replacing the lead...
    view full answer...
  • Landing Gear Replacement Leg for 2007 Alpenlite Defender
    I thought I had a replacement leg setup that would work for you till I read that you have a motor on each of the landing gear legs. Is there anyway you could send me a picture of what you have so that I can see if I recognize it?
    view full answer...
    Image 1 for Image 2 for
  • What Holds Inner and Outer Landing Gear Tubes Together on Lippert Landing Gear Follow Leg
    Thank you for the photo of your 5th wheel landing gear leg. My technical contact at Lippert Components confirmed that on their landing gear legs such as this follow leg # LC179014 the outer tube has two pinch points that are intended to prevent excessive extension of the inner tube. These pinch points are also intended to prevent the inner tube from completely leaving the outer tube. My contact indicated that for safety reasons it is not recommended to try to repair this jack leg; it should...
    view full answer...
    Image 1 for
  • Do Lippert Landing Gear Legs # LC179013 and # LC179014 Have Grease Fttings
    There is a great chance either of the legs you mentioned would work as a replacement, but I'd need to know for sure what landing gear you have on your trailer. The Lippert landing gear like the part # LC179013 and # LC179014 are very popular and there's a strong chance this is what you need.
    view full answer...
    Image 1 for
  • What Replacement Lead Leg Do I Need for My 2011 Keystone Montana Trailer?
    We do have the measurements for the Replacement Lead Leg for a KeyStone Montana Trailer # LC178653. I went ahead and attached a picture of the dimensions to this answer. Even though this leg has three bumps, it will still work to replace the lead leg on your 2011 Keystone Montana 5th-wheel trailer.
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 1995 Jayco Designer Series
    Your 1995 Jayco 3030 Designer Series landing gear was made by Atwood who is no longer in business. There is no longer a rebuild kit available for your landing gear. My recommendation is to replace both your lead and follow legs with the Lippert landing gear because Lippert bought out Atwood. It should be a simple swap using your current brackets. I recommend the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin # LC179013 and follow leg # LC179014. I've attached...
    view full answer...
    Image 1 for Image 2 for
  • Lippert Manual to Electric Landing Gear Conversion Parts
    Jeff, it sounds like you have the Lippert Manual Landing Gear Set with Handle # LC333966 and you're wanting to motorize it - In which you can by using your existing gearbox with the Lippert Venture 5th Wheel RV Landing Gear Motor # LC142178 with the switch # LG-145236. If you are looking for a way to convert your landing gear to a dual motor setup then there's really no way to do that without replacing the follow leg with a lead leg, adding a motor and gear box, adding an additional switch...
    view full answer...
  • Replacement Drop Leg for 2017 Heartland 328RE Sundance
    In order to get the correct replacement drop leg you will need to know the manufacturer and model of your current landing gear because they do need to match in order to keep your Heartland Sundance level. For example, the Replacement Lead Jack w/ Drop Leg # LG-179013 is designed for use with Stromberg Carlson models # LG-1, # LG-3, and # LG-183708. I've added a link to our page with out selection of landing gear for you to take a look at.
    view full answer...
  • Looking for Replacement Landing Gear Lead Leg for 2023 KZ Durango
    Hey Johnny, essentially the part # LC122533 and the part # LC179013 are the same as they have the same outer tube length of 29-1/2 inches. The part # LC119102 is for Venture brand landing gear and is still very similar. What brand do you have now?
    view full answer...
  • Replacement Landing Gear Legs for 2017 Open Range 293RLS
    Hey Kelly, so based on the part number you mentioned the correct replacement landing gear legs are the part # LC179013 for the lead leg or part # LC179014 for the follow leg.
    view full answer...
  • Replacement Parts For Lippert Landing Gear LC333964 On 2020 Forest River Wolf Pack RV
    I can certainly help you out with finding replacement parts for your Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs # LC333964. The correct replacement motor for this setup is Lippert Venture 5th Wheel RV Landing Gear Motor # LC142178. This motor is rated for 5,000lbs on single motor 2 leg setup, and 8,000lbs on dual motor setup. If you end up needing a replacement lead leg then you can go with Lippert Components 32" Lead Leg # LC179013, and for a replacement follow...
    view full answer...
  • Comparing Lippert and Stromberg Carlson 5th Wheel Landing Gear Lead Leg Kits
    The Lippert Components 29-1/2-Inch Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 and the Stromberg Carlson Replacement Lead Jack with Drop Leg # LG-179013 are virtually identical. If one fits your landing gear the other will too. Lippert Components is the OEM maker of almost all trailer frames and also of many trailer accessory items like jacks and landing gear. They also make the products as OEM items sold under other brand names like Stromberg Carlson.
    view full answer...
  • Difference Between LC179013 & LG-179013 Landing Gear Legs
    The difference is the height; the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 and Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" # LG-179013 is the lengths. The Stromberg-Carlson is a big longer overall but has a shorter drop leg. These have different travel and are replacements for different landing gear than the # LC119102, so if you have Venture landing gear, you'll need the # LC119102.
    view full answer...
  • Replacement Lead and Follower Legs for 2005 Forest River Cherokee with Fulton Landing Gear
    Yes, you can use Lippert lead leg # LC179013 and follower leg # LC179014 to replace the legs on your Fulton system. Many landing gear parts on newer 5th wheel trailers like yours are interchangeable.
    view full answer...
    Image 1 for
  • Can a Lippert Manual Landing Gear Set Be Converter to a Dual Motor Setup
    If you are looking for a way to convert your landing to a dual motor setup there's really no way to do that without replacing the follow leg with a lead leg, adding a motor and gear box, adding an additional switch and eliminating the cross shaft. For a lead leg you would need part # LC179013, for a gear box # LG-179015 and then motor # LC142178 and switch kit # LG-145236. The follower leg cannot have a gear box attached to it.
    view full answer...
  • Replacement Landing Gear Lead Leg for 2004 Keystone Sprinter
    We may have a replacement lead leg that will work with the landing gear system on your Keystone Sprinter, but I was unable to cross reference the part number you provided to a specific leg that we carry. Most likely the landing gear on your trailer uses the Lippert Lead Leg # LC179013 that you referenced, but there are a couple measurements you can take on your existing leg to make sure it will be compatible. This leg features an outer tube height of 29-1/2 inches and an overall height...
    view full answer...
    Image 1 for
  • Recommended Lubrication Maintenance for Lippert Landing Gear Legs
    Glad to hear how pleased you are with the Lippert landing legs # LC179013 and # LC179014! I spoke to my contact at Lippert and he recommended a white lithium grease like # L11354 for the zerk fitting for the gears and a silicone based lubricant on the exterior of the legs. He also told me that there is no particular schedule for greasing, just an as needed basis. He did tell me that you will want to be careful not to over grease them or the grease will run down the leg and attract dirt...
    view full answer...
  • How to Determine if Lead Landing Gear Leg Will Fit 5th Wheel Trailer
    I can tell you how to find out if the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg # LC179013 will fit your 2011 Dutchmen but trailer manufacturers don't keep specific parts lists that we would be able to cross-reference in any way. What you will need to do is measure your current landing gear leg and if they match the Lippert # LC179013 it will work! I added a photo for you to reference which shows each of the dimensions of this leg; it has an outer tube which is 29-1/2...
    view full answer...
    Image 1 for
  • How To Find the Correct Replacement Landing Gear Legs for a 2013 Keystone Laredo
    In order to find the correct replacement landing gear legs for your 2013 Keystone Laredo 335TG I would need you to take two quick measurements of your existing landing gear legs, the outer tube length and weld stop spacing. I have attached a photo to assist. The most common replacement landing gear legs are the Replacement 5th Wheel RV Landing Gear Legs part # LC179013 for lead and part # LC179014 for follow. These measure 29-1/2" on the outer tube and 15-1/2" between the weld stops....
    view full answer...
    Image 1 for
  • Replacement Legs for Keystone Copper Canyon 5th Wheel Landing Gear
    It is possible to replace just one leg of your 5th wheel landing gear. You will just need to confirm if it is the lead/driver leg or the follow leg. Usually the lead leg is on the driver side and the follow leg is on the passenger side. You'll also want to try to find a brand name and part number on the damaged leg. You want to match up the leg dimensions and the spacing of the mounting brackets as shown in the linked diagram. Most likely your trailer has Lippert landing gear so for a...
    view full answer...
    Image 1 for
  • Replacement 5th Wheel Lead Landing Gear Leg for 2011 Keystone Cougar
    You are correct that Lippert part # LC179013, their 5th Wheel RV Landing Gear Lead Leg, is the correct part to replace the damaged unit on your 2011 Keystone Cougar.
    view full answer...
  • Troubleshooting Venture M-9000-PK Landing Gear on 2010 Komfort Fifth Wheel Trailer
    The next step is to take apart the top of the jack and check the gears there. If you find your problem there, possibly some worn gear teeth, and you have Lippert landing gear, the repair kits are parts # LC146059 for the lead leg and # LC146060 for the follow. Another possibility is the screw down the center of the jacks has possibly gotten stripped. However, if this is the case your best bet will be to replace the legs. You'll need to measure the outer tube to determine which legs...
    view full answer...


< Previous
123. . .4



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Chelsea B
Written by:
Chelsea B
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<