Replacement Landing Gear Lead Leg for 2004 Keystone Sprinter

Updated 06/21/2018 | Published 06/20/2018

Question:

Need a replacement lead leg for a 2004 keystone sprinter 5th wheel. Per dealer part number is 118704. May have been superseded by 120237.

asked by: Aaron R

Expert Reply:

We may have a replacement lead leg that will work with the landing gear system on your Keystone Sprinter, but I was unable to cross reference the part number you provided to a specific leg that we carry. Most likely the landing gear on your trailer uses the Lippert Lead Leg # LC179013 that you referenced, but there are a couple measurements you can take on your existing leg to make sure it will be compatible.

This leg features an outer tube height of 29-1/2 inches and an overall height of 32 inches. The distance from the outside of one weld stop to the outside of the other is right at 17-1/2 inches. You will want to make sure this dimension matches what you have so that it will bolt up to the brackets on your trailer.

If you find that you have different dimensions, please let me know and I will be happy to try and find a replacement that will work.

expert reply by: Chris R