Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody It's AJ with etrailer.com. Today we're gonna be checking out this Curt 7 Pole Bracket. We're gonna use this to install to extend out, where we want our 7 pole plugin to be. Let's check it out. Every setup is a little bit different when you go to add wiring to your vehicle. Sometimes there's not a whole lot of room underneath.
So on our vehicle today, we wanna bring the adapter further out so it's easier to plug in our trailer. You don't want it in back here behind the hitch and there's not really room up here towards the top. So with the long bracket, we attach the 7 pole bracket so it has a spot to stay all the time and we know it's secure. As far as install goes, I would just go ahead and get a long bracket to extend it away from the vehicle so you have something to attach to. But check out how I did it.
We have everything set up here. We're ready to add our 7 pole bracket, and this has the holes here to line up with the top. So it'll just drop our pole through, line up that first one, I'm gonna put a nut on the backside that'll help hold it in place. So now we're gonna add a nut on this side. You wanna make sure you look at the spacing between the holes.
So this bracket is gonna work best with the hole spacing, which is gonna be from center to center on these mounting holes that has this spacing of 2-1/4". Now if you had one that had 2-1/2" like this other one, the holes just aren't gonna line up correctly. You want a different 7 pole bracket, which Pollak offers that as well, that it fits way better. So you just slide that in there and already see 'cause the slot and holes are gonna be more adaptable to whatever setup you have. Same thing with the hardware.
Pull a bolt through here and then add it out on the backside. And we're gonna do that for all 4 holes on our 7 pole. With all 4 of these installed, we'll come back with our wrench, go on the back and then use a flat blade screwdriver to finish tightening it down so the plug stays in place. That about does it for a quick look at the 7 pole bracket, really easy to install and really helpful to have to get that 7 pole moved out more towards the back of the vehicle. Well, I think that does it. Thanks for hanging out, hope this helped.
Nice bracket, but it does not fit the hole pattern on the Curt seven pin round plug for the 2025 Honda Pilot wire harness kit. I had to drill new holes.
This mounting holes on this didn't fit any of the Curt wiring harnesses I had. I ended up using it by zip tying a couple of mounting holes on the wiring harness and bracket, but they broke during use and I ended up ruining my trailer connector. I replaced it with the Curt 58000 easy mount, which worked much better and didn't require any drilling on the body of the vehicle. Not sure why Curt sells a plate that doesn't match the hole locations on most of its wiring harnesses.
Mounting bracket did not lineup with the seven wire plug at all, modifications were required
This bracket DOES NOT amount on properly to a 2023 Honda Pilot. The class 3 hitch mounting point is more on a slight angle. I’m not one to custom anything thinking this would just mount up but it doesnt
Comes with zero hardware and bolt hole spacing for the 118266 wiring harness that I bought here do not line up at all. Good thing the bumper had a cutout ready to install the 7 way plug connector.
Thanks guys my trailer hitch for my 2024 GMC Acadia fits perfectly and the wire harness fits perfect also I received it in great timing. I’m well pleased with the hitch
This is kinda flimsy but it works. There are no mounting holes with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" trailer hitch mount I purchased, so I had to drill holes into the steel, which is kind of a pain, but like I said, it works, so if you're ok with that approach, I'd recommend it.
Thin and flimsy. Holes on the "universal" plate didn't line up with the C56413 7 pin wiring harness from the same brand.
Won’t work with end connection of 7 pin connector had to by one at orileys it’s holes don’t line up not even close
It doesn’t match up with the seven way connector plug holes are all off for bolts
Hole pattern did not line up with Curt wiring harness kit I purchased. Not wide enough to be able to modify/redrill. Kind of worthless!
Mount holes are not same as the 7pin plug bought also on etrailer
Cheaply made problem to flimsy material
Brooke M.
4/15/2025
I hear ya, Warren. I appreciate your honest opinion on this part!
I'll give this an average review since it's possible I just didn't order the right bracket, but the holes on this bracket didn't line up with the holes on the 7 way. Also, this is only helpful if you have either a metal bumper or a hitch kit that hangs lower. For my 2025 Honda Pilot I ended up having to install the 7 way directly into the bumper by cutting a hole, which looks nice and works great but made ordering this bracket pointless. I think this was only like 7$ so I'm not mad, just do your research first and see if you even need it and make sure the holes will line up.
The predrilled holes didn't match up with the plug assembly.i just drilled it out and attached it that way.
Well built
Worked great
great product
Fit great. Easy install
Attached to my small John Deere tractor. Worker fine.
Does not fit the trailer harness I ordered with it, although it said it would.
Solid part but only two holes matched the 7 pin plug supplied with my Curt custom wiring kit. I also chose to drill the mounting holes larger to use 1/4” screws.
Keith
6/2/2022
Bracket still in operation but edges beginning to show rust from the Western NY state winters.
Nice brackets, sturdy & strong
Needed this for my 7 pin install and it worked great.
Does not work well with the etrailer 7way kit I bought. Holes do not line up
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Katrina B.
6/20/2022
I have pulled both the bracket, part # C67UR and the harness you had purchased, part # C68JR for measurements. As you have mentioned, this harness does not fit with this bracket. However, we do have a bracket, part # HM48625 that will fit the harness you had purchased.