Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors

Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors

Item # HM48625

lowest price pledge


Our Price: $7.60

You Save: 58%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.36 lbs

In Stock
Accessories and Parts HM48625 - 6 Round,7 Round - Hopkins
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • Wiring
  • Mounting Brackets
  • Hopkins
  • 6 Round
  • 7 Round
Use this bracket to mount your 7-way or 6-way round trailer connector on your vehicle. Built-in slot lets you easily install the bracket without having to disconnect your wiring. Black powder coat finish resists corrosion. Call 800-298-8924 to order Hopkins accessories and parts part number HM48625 or order online at etrailer.com. Free expert support on all Hopkins products. Guaranteed Lowest Price and Fastest Shipping for Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors. Accessories and Parts reviews from real customers.

  • All Info
  • Reviews (8)
  • Q & A (9)
  • Videos (1)
  • Photos
  • Why etrailer?

Hopkins Accessories and Parts - HM48625

Use this bracket to mount your 7-way or 6-way round trailer connector on your vehicle. Built-in slot lets you easily install the bracket without having to disconnect your wiring. Black powder coat finish resists corrosion.


  • Bracket lets you quickly and easily mount your 7-pole or 6-pole connector on your vehicle
  • Built-in slot makes it easy to mount pre-wired connectors
    • Just slip the wires through the slot when you mount the connector
  • Sturdy steel construction is long-lasting
  • Black powder coat finish resists corrosion
  • Hardware sold separately
  • 90-Day warranty

48625 Hopkins Electrical Mounting Bracket for 7-Pole or 6-Pole Trailer Connector - Vehicle End

California residents: click here

Video of Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Hopkins Wiring HM48625 Review

Today we're gonna take a look at the Hopkins universal mounting bracket for seven-way and six-way trailer connectors. Now this mounting bracket will let you quickly and easily mount your seven-way or six-way connector on your vehicle. The built-in slot right here at the bottom makes it easy if you have any pre-wired connectors. You can just slip the wires through that slot and then mount the connector to the bracket. This is a nice sturdy steel construction, very long-lasting. Has a nice black powder coat finish to it to help resist corrosion.

Now the hardware that's used to mount the connector to the bracket, we do sell that separately and we do list it on this product page of this part number as a related product. But basically what I wanted to show you here, I happen to pull a Hopkins seven-way blade style connector, and you can see that it would go right into the hole there, line your holes up and then put your mounting hardware right through there to hold it into place. And if this connector happened to have the pre-wired connectors that you couldn't take apart, you can just slide the wire with the pre-wired connectors through there and then mount it on there just like that. A few dimensions on this. I'm gonna give you the measurements of the mounting holes on the top part, center to center is right at 2 1/4 inches. On the face of the plate edge to edge is right at 3 3/8 inches. And the height on it is right at 3 7/8 inches. That should do it for the review on the Hopkins universal mounting bracket for the seven-way and six-way trailer connectors..

Customer Reviews

Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors - HM48625

Average Customer Rating:  4.5 out of 5 stars   (8 Customer Reviews)

Use this bracket to mount your 7-way or 6-way round trailer connector on your vehicle. Built-in slot lets you easily install the bracket without having to disconnect your wiring. Black powder coat finish resists corrosion.

- HM48625

Everything showed up in good shape within a week of placing the order. 360757

- HM48625

I am very happy with all the products and prices of items I have purchased from etrailer. Item # HM48625 is very well made and easy to use. The slot at the bottom is a excellent addition that makes even easier to use. Unfortunately I doubt that I will be ordering from etrailer in the future due to there practice of blowing up my computer with pop up's and ads. This practice turns a pleasant experience into a negative one. 343676

- HM48625

So far so good all products worked as a dvertised 642060

- HM48625

Good product. Mounting holes were a little small for my bolts. 637735

- HM48625

Would have been nice to get the bolts nuts and washers with the bracket for the trailer hook up and would have been nice to know that the pins I bought are barely long enough to make it through the mounting bracket required me to bend them to make them fit. 569828

- HM48625

Easy install! This is definitely a job to do yourself! 417709

- HM48625

Excellent fit great quality easy instal l. 360244

- HM48625

Didn't realize that Traverse tow wiring kit PN 118271 didn't come with a mounting bracket. Discovered this on a Sunday. Needed a "universal" type like this one. I called eTrailer on Sunday afternoon and Bill went to the warehouse and verified that my Tekonsha 7-way connector would fit on this mounting bracket. It did, and he mailed it to me. Fit's great. 346096


Ask the Experts about this Hopkins Accessories and Parts
Do you have a question about this Accessories and Part?

  • 7-Way Mounting Bracket Recommendation for Use with Curt Trailer Hitch C15810
  • The Curt hitch part # C15810 does not have a bracket built into it for mounting trailer wiring. Since your truck has a 7-way what you'd want is a 7-way mounting bracket like part # HM48625 which will attach to the bumper of your truck and allow your 7-way to attach to it. Don't install this on the hitch though as you shouldn't ever drill into the hitch.
    view full answer...

  • Recommended Mounting Bracket for Curt T-Connector 7-Way on a 2013 Nissan Xterra
  • I do have a solution for you but when I went out to the warehouse and tested the Curt T-Connector # C56226 with the 6 and 7-Way Trailer Connector Mounting Box # 18159 that you referenced to find that they actually aren't compatible due to the mounting hole locations on the Curt 7-Way. Instead of the Draw-Tite mounting box I recommend going with the Hopkins Universal Mounting Bracket # HM48625, which has a variety of mounting holes that will line up, and the No-Drill Mount Bracket # 18140....
    view full answer...

  • Dimensions of Hopkins 7-Way Trailer Connector Mounting Bracket
  • The mounting bracket is 3-3/8 inches across and 3-7/8 inches tall. The mounting holes on top of the bracket are 2-1/4 inches apart center on center. The holes to mount the 7-way to the bracket have a few different options. The two round holes on the sides are 2-7/8 inches apart. The top set of the four holes are 1-3/4 inches across and 2-1/2 inches up and down. The other set of holes are 2-1/2 inches across and 1-1/8 inches up and down. Some of the hole spacing is hard to explain...
    view full answer...

  • Trailer Hitch for 2017 Volvo XC90 R-Design and Mounting Bracket for Factory 7-Way Trailer Connector
  • I did some checking at the Draw-Tite trailer hitch # 76194 is listed as a fit for all styles of the 2017 Volvo XC90 so that would include the R-Design. Like you said there is some fascia trimming required. If you do not want any contact between the fascia and the hitch receiver then you would just need to trim slightly more above the receiver (if there is contact). From what I could find on Volvo part 31373661 is that it is listed for a 2016 XC90 and not a 2017 so I do recommend verifying...
    view full answer...

  • Hitch Capacity Clarification for Draw-Tite Max-Frame Trailer Hitch Receiver #75725
  • Hitch Classification has more to do with organization than really anything else. The important thing in this case is the towing capacity of the hitch. Which the part # 75725 certainly has capacities that are in the Class IV range at 6,000 lb total trailer capacity and 600 lbs tongue weight. It does have this rating with it's current attachment points which you can see in the picture I attached. For a 7-way mounting bracket we have the part # HM48625 which would work well. It is designed...
    view full answer...

  • 7-Way Mounting Bracket For 2003 Chevy Avalanche and How to Pick Out Weight Distribution
  • That we normally see all 7-way blade connectors are the same size and will connect to each other. The pins are blades though and not round pins correct? Do you have any pictures?
    view full answer...

  • Can Curt Echo be Permanently Mounted on Trailer Tongue
  • I spoke with my contact at Curt and he said that the Echo # C51180 should not be permanently installed on the trailer frame. Even though it can withstand the elements it isn't meant to be left out when not in use. To mount the 7-Way on your Subaru Outback Wagon so that the Echo can be used I recommend using the 7-Way Mounting Bracket # HM48625 and then a No-Drill bracket like part # 18136 or # 18140 to keep from drilling into your fascia or trailer hitch.
    view full answer...

  • Dimensions of Mounting Bracket Included with Hopkins Endurance 7, 5, & 4-Way Flat Trailer Connector
  • The mounting bracket for Hopkins trailer connector # HM48470 has the top mounting holes spaced 2-1/4 inches apart on center. It is 3-3/8 inches wide and 3-7/8 inches tall. It is very similar to # HM48625 though without as many mounting holes for the connector as # HM48625.
    view full answer...

  • Curt Echo Wireless Brake Controller Compatibility with 2016 Thor Palazzo and Trailer Side Mount
  • The Curt Echo Mobile Trailer Brake Controller - Wireless # C51180 can be hard mounted to the trailer but it cannot have any flop or movement of the unit because it is inertia based and needs to be able to find the consistent point to monitor movement from. The direction of the controller isn't an issue so if mounted to the side frame at an angle is okay. You can use an extension like the Curt Universal 5th Wheel/Gooseneck 7-Way Extension - 7' Long # C56080 which can be shortened or coiled...
    view full answer...

Do you have a question about this Accessories and Part?

  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Alexander C
Photos by:
Jeffrey L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.