Parts Needed To Tow A 3,300lb Trailer With A 2024 Ford Ranger
Updated 06/04/2024 | Published 05/29/2024
Products Featured in This Question
Question:
my ford ranger without the tow package is rated for 3500 lbs . my 16ft camper 3300 . would it be safe to tow for short disatnces with just the bumper .
asked by: John P
Expert Reply:
Hey John,
The common consensus on capacity is that you should really only use 80-85% to give yourself a margin or error. At 3,300lbs you'd be at roughly 94% capacity so you still technically could but it's likely going to sag the rear suspension and be tough to pull. Even though Rangers are pretty well known for being overloaded and powering through I'd recommend adding in a bit of suspension enhancement or using a weight distribution hitch to help control the trailer and keep it tracking straight behind you.
If you're wanting to install a trailer hitch then the Draw-Tite Max-Frame Trailer Hitch Receiver # DT35PR would be a compatible fit. If you don't have a trailer wire harness connector already then you can use the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56431 and attach the 7-way to the # DT35PR with mounting bracket # C67UR.
To help support your suspension you can swap out your factory bump stops with the SumoSprings Solo Custom Helper Springs # SS86MR. These jounce springs have a progressive load control up to 1,500lbs so they stiffen up more as the weight increases to keep the ride quality smooth when you aren't towing anything.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 750 lbs TW
- 7500 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Towing Mirrors
- Shop: Suspension Enhancement
- Search Results: trailer hitch ball
- Search Results: ball mount
- Shop: Trailer Wiring
- Shop: Base Plate for Tow Bar
- Search Results: timbren
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector
- Shop: Brake Controller
- Shop: WeatherTech SillProtector - Door Sill Protectors - Custom Fit - Qty 4
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Tonneau Cover
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Timbren Rear Suspension Enhancement System
- Q&A: Will Timbren Rear Suspension Enhancement System Fit a 2023 Ford Ranger with Tremor Package
- Q&A: Does Curt Trailer Hitch For Sure Fit 2024 Ford Ranger
- Search Results: trailer tires and wheels
- Video: An In-Depth Look at the etrailer Electric A-Frame Trailer Jack - 2018 Dutchmen Kodiak Ultra Lite Tra
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE96EV
- Video: Review of the Camco Trailer Tongue Jack Stand
- Q&A: What Diameter Line is Used with Firestone and Air Lift Air Tubing
- Q&A: Which Capacity SumoSprings for a 2021 Ford Ranger?
- Q&A: Are Ride-Rite Air Bags Compatible With 2023 Ford Ranger Tremor
- Q&A: Firestone Ride-Rite Air Bags for a 2021 Ford Ranger XLT 4WD w/ the Tremor Package
- Q&A: Are Timbren Jounce Springs a Good Option for Suspension Enhancement on 2020 Ford Ranger
- Video: Install: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector on a 2021 Ford Ranger