See what our Experts say about this Master Lock Trailer Hitch Lock

• Can Trailer Coupler Lock Pins be Replaced?
  Hey William, thanks for reaching out! Usually there isn't a way to get just the replacement pin, but if you have a kit like the Master Lock # 3794DAT, we have some of it pieced out and you could get just the locking pins as part # 2866DAT or part # 2848DAT. This would come with an additional lock, but you would be able to simply swap it out to the one you currently have so everything is still keyed alike. If you let me know what specific lock kit you have, I'd be happy to see if we have...
  view full answer...
• How to Install ToyLok Mounted Retractable Cable Lock to 4x4 Bumper on 2020 Alpha Wolf
  The U-Bolt mounting kit that comes with the ToyLok ATV/UTV Mounted Retractable Cable Lock # LC337120-337114 can be found separately as part # LC337114. To mount this to your bumper you'll have to get a bit creative because the U-Bolts are designed to fit 3/4" - 1" ATV-UTV racks so there is no way that they will wrap around your 4" square bumper if that's what you had in mind. Another solution would be to install a hitch receiver on your 4" square bumper, like the Curt # E-100, and then...
  view full answer...
• Trailer Wiring Recommendation for a 2008 Infiniti EX35
  Thank you for your purchase of the Class I 1-1/4" Curt Trailer Hitch Receiver # C11510 for your 2008 Infiniti EX35! When it comes to the wiring you'll have to use a splice-in option and for that I recommend the Curt # C59236. This kit has the black module box that helps protect your OEM wiring and a power lead so your trailer lights will be powered straight from your vehicle battery. To install this you will use the tester to see what wires carry the functions you need to connect to but...
  view full answer...
• Metal Ford Trailer Hitch Cover Options for 2 inch Hitch Receiver
  The Ford Logo Trailer Hitch Receiver Cover # PC002236 that you were looking at is all metal and you can use the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches # 2866DAT to secure it to your hitch receiver. If you'd like something that doesn't require assembly then we have the Stainless Steel Cover # AUT-FOR-C.
  view full answer...
• Replacement Locking Hitch Pin for Subaru Bicycle Rack Made by Yakima
  Yakima did make the Subaru-branded bike rack but they do not offer any replacement parts directly; these proprietary parts can only be purchased from Subaru. Your Forester could be equipped with either a 1-1/4-inch or a 2-inch hitch receiver. The diameter of the hitch pin will be 1/2-inch for 1-1/4-inch hitches or 5/8-inch for 2-inch hitches. You can measure the size of the receiver opening on your hitch (or the hitch pin hole itself) to determine which size pin you need. If your hitch...
  view full answer...
• Where to Measure to Determine if Span of Hitch Lock 2866DAT Is Long Enough
  The usable span of the # 2866DAT that you referenced is 2-3/4 inches. You would need to measure the width of your hitch to know if that would be enough. Most likely it would be pretty close.
  view full answer...
• Cargo Carrier And Hitch For 2011 Chrysler 300 To Carry Folding Wheelchair
  If you do not have a hitch on your 2011 Chrysler 300, I recommend a hitch and a cargo carrier. After doing some research on your vehicle I found that the towing weight capacity is 1,000 lbs. that means the maximum tongue weight capacity or total weight a hitch could handle is approximately 100 lbs. I recommend the Draw-Tite Trailer Hitch, part # 36548. This is a Class ll hitch and has a 1-1/4 inch receiver opening. I also recommend a flat hitch-mounted cargo carrier like the Rola Packer...
  view full answer...
• Locking Hitch Pin Recommendation for Use with Curt Cargo Carrier # C18110
  For a locking hitch pin to use with the Curt Cargo Carrier part # C18110 the Swivel Head Lock aprt # 2866DAT would be a great option confirmed to fit. I attached a review video for this lock for you to check out as well.
  view full answer...
• Recommended Hitch Mounted Platform Carrier For 2013 Kia Sorento SX
  The lightest carrier we offer that has the biggest shank rise and will fit hitches that are either 1-1/4 or 2 inches is the Curt Hitch Cargo Carrier, part # C18110. This carrier has a 3-3/4 inch shank rise. Since this will fit both Class ll and Class lll hitches, this may work well for your 2013 Kia Sorento. This carrier weighs only 30 lbs and has a weight capacity of 300 lbs. If you want to secure the carrier to the vehicle hitch, I recommend a Hitch Receiver Lock, part # 2866DAT. This...
  view full answer...
• Do Hitch Pins and Hitch Lock Have Trailer Weight Ratings
  Standard hitch pins like # PC3 and hitch locks like # 2866DAT do not have specific trailer weight capacities because all of them are capable of towing more weight than any trailer hitch they will fit. You do not need to have any concerns with the weight capacity of a hitch pin or lock.
  view full answer...
• Compatible Trailer Hitch Lock for a Class I CURT Trailer Hitch and Surco Cargo Carrier
  The CURT Trailer Hitch, # 11110, is a Class I trailer hitch with a 1-1/4 inch receiver. It uses a 1/2 inch diameter hitch pin hole. All of the locks you have mentioned # 2866DAT, and # 7682 will all fit it. They will also fit the Surcp Cargo Carrier that you referenced. Since the Surco is no longer available, you might consider the Reese Carrier # 63155. Out of the 3 locks, I would go with # 5200. These are among our best selling locks. For the trailer hitch, CURT requires the use of...
  view full answer...
• Hitch Cargo Carrier, Cargo Net & Hitch Lock for 2014 Fiat 500L
  The hitches made for your 2014 Fiat 500L are the light-duty Class I type and in one of these you will need to use a Class I-compatible hitch-mount cargo carrier. One thing to keep in mind is that the combined weight of your chosen carrier and what you load onto it cannot exceed the hitch tongue weight (TW) rating of 200-lbs. This means that a good choice will be one of the lighter carriers that will not use up too much of the hitch capacity. The Curt hitch carrier # C18110 weighs in at...
  view full answer...
• 1/2 inch Diameter Hitch Pin Lock with 2 inches of Span
  We have the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches part # 2866DAT which has a 1/2 inch diameter and an inside span of 2-3/4 inches which would work well for you.
  view full answer...
• Recommended Lock For Trailer Coupler, Trailer Latch, and Hitch Pin Hole
  In order to lock your ball mount to your trailer hitch, I recommend the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches # 2866DAT. This will deter theft of any accessories or ball mount in your trailer hitch. I have attached a review video of this hitch pin.
  view full answer...
• Does Master Lock Hitch Lock Fit Curt Ball Mount for 2 Inch Hitch
  Thanks for the purchase of the Curt Ball Mount for 2" Hitches # C45070, and the lock you mentioned - the Master Lock Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches # 2866DAT - is absolutely compatible with the Curt ball mount.
  view full answer...
• Availability of Equal-i-zer Part # 90-00-0600 and Locking Hitch Pin
  The Equal-i-zer part number you referenced is our part # EQ37060ET which is an entire weight distribution system rated for a tongue weight range of 200 lbs - 600 lbs. For a locking hitch pin to use with it the # 2866DAT is an easy to use and solid choice.
  view full answer...
• Is The Master Lock Hitch Receiver Lock Compatible With Ball Mounts For 2 Hitches
  The Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches Item # 2866DAT is compatible with Curt Fusion Ball Mount for 2" Hitches - 1-7/8" Ball - 2" Drop - 5,000 lbs Item # C45131. It comes with both pins to fit 1/2" and 5/8" hitch pin holes.
  view full answer...
• Availability of Deadbolt Stainless Steel Hitch Locks for Class I and II Hitch
  I recommend the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches # 2866DAT, that is made of chrome-plated steel to resist corrosion. The Deadbolt stainless steel lock for a 1-1/4 inch hitch has been discontinued by the manufacturer.
  view full answer...
• Trailer Hitch Lock Recommendation for 2014 Ram 1500 with Factory Hitch Receiver
  Unless you have a separate use for an 1-1/4" hitch receiver lock, you will only need one hitch lock for the 2" factory hitch on your 2014 Ram 1500. The Fastway Trailer Hitch Receiver Lock # FA86-00-3050 is my personal favorite for a couple of reasons. The barrel style key offers much better security than standard flat key mechanisms since they are almost impossible to drill or pick. Also, there are replacement keys readily available if you ever find yourself in a situation where you're...
  view full answer...
• Available Military Theme Hitch Covers
  We sure do! We have hitch covers for all branches of the military and public service, and also for college and pro sports teams, vehicle brands, hobbies and many other interests. You can see all military-related hitch covers using the link provided. The other link will display every theme of hitch cover we offer. You can click on the hitch size you have to see the covers that will fit. For example, for a Navy Seal hitch cover we offer items like # AMG102397 which fits 2-inch hitches. For...
  view full answer...
• Locking Hitch Pins For 2" and 1-1/4" Hitch Receivers That Are Keyed Alike
  There are two different sized pins that come with the Swivel Head Trailer Hitch Receiver Lock for 1-1/4" and 2" Trailer Hitches part # 2866DAT. One pin works with a 1-1/4" hitch receiver and the other works with 2" hitch receiver. They will use two different keys on the same key ring. The Master Lock Hitch Receiver and Coupler Latch Lock Set part # 2848DAT also comes with a lock for a 1-1/4" hitch receiver and a 2" hitch receiver but they both use the same key. However it sounds like...
  view full answer...
• Hitch Sizes Compatible with North Carolina Tar Heels "NC Logo Trailer Hitch Receiver Cover CTH9S
  You are correct that the Siskiyou North Carolina Tar Heels "NC" Logo Trailer Hitch Receiver Cover # CTH9S does fit most 1-1/4-inch Class II and 2-inch Class III hitches. I both checked with the manufacturer and took a look at our inventory and two sets of brackets are indeed included, as shown in the photo. If you want a lock to protect this cover from theft I suggest hitch lock # 2866DAT which will fit both hitch sizes.
  view full answer...
  
• One Hitch Lock for 1-1/4 Inch and 2 Inch Trailer Hitches
  We do not have a locking pin with a sleeve but I do have an awesome recommendation for you. Since you would have to keep track of the sleeve any way you could use Master Lock lock set # 2866DAT. It has a 1/2 inch pin and a 5/8 inch pin that use the same lock. Instead of storing a sleeve somewhere you would be storing the pin that isn't being used.
  view full answer...
• Can The Master Lock 2866DAT Work With A Hollywood Racks Sport Rider HR1000Z Bike Rack?
  As the hitch pin on your Hollywood Racks Sport Rider # HR1000Z bike rack is threaded, the Master Lock # 2866DAT locks will not fit without having to drill the threads out of the shank. The threads are there so that when you tighten the pin into the shank, it will secure the rack more tightly and keep it from wobbling in the hitch. Drilling them out will cause you to lose this feature. I can also say that Master Lock parts will only work with Master Lock parts, so there is a very very high...
  view full answer...

Do you have a question about this Trailer Hitch Lock?