Locking Hitch Pin Recommendation for Use with Curt Cargo Carrier # C18110

Question

Question:

What LOCKING pin will fit this rack? C18110

asked by: Locking P

0

Expert Reply:

For a locking hitch pin to use with the Curt Cargo Carrier part # C18110 the Swivel Head Lock aprt # 2866DAT would be a great option confirmed to fit.

I attached a review video for this lock for you to check out as well.

expert reply by: Jameson C

0

Answer 1

If you are looking for a cargo bag for the 17x46 Curt Cargo Carrier #C18145, I recommend the etrailer Cargo Bag #e98990. The bag is 40" long x 19-1/4" wide x 20-7/8" tall, versus the 46-3/8 x 17-9/16 interior dimensions of the cargo…

view full answer...

Answer 2

Since the shank of the Curt Cargo Carrier part #C18110 that you referenced is hollow the hitch lock you'd want is the part #e98879 which will fit and work well.

view full answer...

Answer 3

Yes, in order to secure the Curt Cargo Carrier part #C18110 to the Draw-Tite Sportframe Trailer Hitch Receiver part #24915 that you have installed on your 2014 Kia Soul, you are going to want to use the Trailer Hitch Anti-Rattle Kit part #F-315. This…

view full answer...

Answer 4

When using the Curt hitch carrier part #C18110 in a 1-1/4 inch hitch you'd need to take off the 2 inch hitch adapter on the end of the shank. This will allow it to fit the smaller hitch size. The same threaded hitch pin gets used whether you use…

view full answer...

Answer 5

Hello again Dennis; it really depends on what your max tongue weight is on the 2024 Honda Civic. The Curt #C92UR has a max tongue weight of 200 lbs. A cargo carrier like the #C18145 and #C18110 will take up 30 lbs of that leaving you with 170 lbs of…

view full answer...

Answer 6

We have the Carpod Cargo Bag part #M2202 which is 46 inches long by 22 inches wide which would fit perfectly on the 49x22-1/2 Curt Cargo Carrier #C18113 you referenced. It comes with straps to secure it to the carrier as well!

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Eric. Welcome back and congrats on the new SUV. The Curt item #C26VV is listed as fitting the 2026 Grand Highlander but I have a better option for your 2026 Grand Highlander Hybrid Limited. It's our etailer item #e69ZV. We've actually…

view full answer...

Answer 12

Hey Mark, the only real downside to an offset ball like the Gen-Y part #GY43XR is going to be that it costs more typically and it would take up more room when stored compared to a non-offset ball like the #C38CR. The handling and weight carrying…

view full answer...

Locking Hitch Pin Recommendation for Use with Curt Cargo Carrier # C18110

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching