Available Military Theme Hitch Covers  

When tightening the anti-rattle device of your Kuat Transfer V2 Bike Rack for 2 Bikes #KU74FR you'll want to tighten it until the bike rack no longer moves inside of the trailer hitch. When pressing on the bike rack the vehicle should move but…

I reached out to my contact at Kuat, and sent him the picture you attached, and he said that what you are seeing is actually pretty common when using the Shank Adapter #D101. He said the hitch pin holes will indeed be a bit off center when using the…

All of the hitch covers for Rice and Rutgers are for 2 inch trailer hitch receivers. But do not worry, you can still use any of them in a 1-1/4 inch hitch as long as you use an adapter like #HTAD. This unit has a 1-1/4 inch shank but a 2 inch…

Hey Barb, one solution is to go with a 1-1/4 inch to 2 inch hitch adapter like the #HTAD but the downside is that these adapters cut the hitch capacity by 50 percent and they do add movement and length to the setup. This is most ideal if the rack…

The Kuat Transfer part #KU74FR that you referenced will fit both a 1-1/4 inch and 2 inch hitch equally well. The metal sleeve adapter that allows it to fit the 2 inch hitch size provides just as solid of a connection as the 1-1/4 inch hitches.

Hey Jacob, the Kuat Beta bike rack part #B202-2 is designed for only fitting 2 inch hitches and does not come with an adapter to also fit a 1-1/4 inch hitch. The version of this rack that fits the 1-1/4 inch hitch is the part #B202-114. For a similar…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…