Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 part number: Y00429
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Clear anodized alloy finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06123
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006123 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06153
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006153 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06123
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06153
Average Customer Rating: 4.8 out of 5 stars (1816 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.1608442
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.844973
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!1644209
Follow the instructions, and you can't go wrong on the self installation1757391
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Lynn02/14/2024
Great fit, holds tight to roof. 1731709
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.870712
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.1550963
by: Roland01/08/2024
Well packaged and on time 1708575
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.1250442
by: Kevin07/04/2020
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos. 830253
by: Sara03/19/2019
2017 Honda Pilot
Yakima is always great, the bars are just right for my kayaks and look great too. 612864
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.1515794
by: Orlando12/05/2022
Hi, the company, good profesinal service. The product, all I pay was there. Very easy to install. Thanks Bless1478927
by: Moparnut22808/20/2023
Great product fast shipping 1651167
by: Andrew08/01/2023
2012 Honda Civic
Great! Easy to install! 1639087
by: Rebecca 12/31/2022
Great fit, feels really sturdy, excellent directions1491877
by: Jenny05/26/2020
Volkswagen Golf
Relatively easy to install on my VW Golf (etrailer videos are very helpful) and sooooo useful with my Yakima skybox. Not much road noise, so I can leave the rack on even when I am not using it.805074
by: John P.08/29/2018
2017 Volkswagen Golf
Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on.
etrailer.com shipped these out quickly and all parts arrived without damage.559496
by: Steve K.04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.634356
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum view full answer...
The best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- TimberLine Towers for Yakima Crossbars # Y33TR
I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise.
It is also highly view full answer...
To add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV
I have attached a couple of pictures below that will show you what this roof rack looks like and view full answer...
Yes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install. view full answer...
Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts:
- Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR
- Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229
- (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202
With view full answer...
The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components:
Crossbars # Y00429
Feet # Y28TR
Fit Kits # Y06125 and # Y06165
I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft.
Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise view full answer...
Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails.
Bare Roof
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- BaseLine Towers # Y28TR
- BaseClip Fit Kit view full answer...
For a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle.
I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16" view full answer...
The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers.
In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit view full answer...
Yakima recently discontinued their Q-Tower roof racks which means their Q clips are gone as well. You would need the Q7 clips part number 8000607 but they are not available anymore. We do have a solution that would allow you to still use the round bars you have though. For that you'd want the part numbers # Y28TR, # Y03536, and # Y06122 since you already have the round bars like part # Y00410. view full answer...
I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162.
The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked view full answer...
Yakima Baseline Towers # Y28TR comes with a total of 4 towers.
If you are looking for a complete crossbar system that includes the Yakima Baseline towers, I would be happy to assist you if you confirm your year/make/model of vehicle.
view full answer...
While we have a way for you to use Yakima round crossbars on a 2019 Ram 3500, it will need to be as a roof rack application, and the reason for that is the BAK Vortrak Hard Tonneau Cover slightly covers the stake pockets of your '19 Ram 3500 and there is no way to add a rack system over the tonneau without interference.
There is also not a way to attach those crossbars to the bed of your truck, but what you can do instead, so long as your 2019 Ram 3500 is a Crew Cab or Mega Cab is use view full answer...
We do! The lock kit you need for the Yakima BaseLine Towers # Y28TR can be found on our site as part # Y07204. This kit comes with 4 matching lock cores, 2 keys, and the change key needed to remove and install the cores. view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the view full answer...
Aside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta.
Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier. view full answer...
There are many different parts that are needed for various vehicles, so it is difficult to piece together complete package kits for each and every vehicle on the road which is why you sometimes see a few parts that are required for a complete roof rack. If you go into our vehicle fit guide and enter in all of your vehicle's information, you should be able to see every part that is required for each roof rack system.
It looks like you were checking out the BaseLine Towers # Y28TR. These view full answer...
The best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek.
The roof rack for your '20 Escape is made up of:
- Yakima JetStream Crossbars # Y00426 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152
- Same Key System Lock Cores (Optional) # Y07204
The aero shape view full answer...
I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071.
If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130.
For flush mount rails you would instead need the 50" JetStream Bars # Y00425, view full answer...
We do have a roof rack to fit your 2017 GMC Terrain with a naked roof. I suggest the Aerobars for better aerodynamics and less noise. For this system, I recommend the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425, the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR, the RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06146.
This will give you a complete view full answer...
I have a couple of options for roof racks depending on whether or not your 2022 Kia Telluride has the flush mounted rails that run front to back.
If your Kia has the flush mounted rails that run front to back you will want the 2022 Kia Telluride Roof Rack by Rhino Rack. The Roof Rack Includes:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 item # RR94DY
If view full answer...
I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired.
If your 2018 CR-V has a completely naked roof you will need # Y28TR for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the view full answer...
I reached out to my tech contact at Yakima to see if your 2007 Nissan Sentra has the Q-clips you were seeking. Unfortunately, he said they don't have a Q-clip fit and the baseline towers are your only option for a Yakima roof rack.
For that system you will need:
Yakima JetStream Crossbars - 50" Long # Y00425
BaseLine Towers for Yakima Crossbars # Y28TR
BaseClip Fit Kit # Y06142
Yakima Same Key System (SKS) Lock Cores # Y07204 (optional) view full answer...
For your 2015 Volkswagen Golf TDI with a Yakima BaseLine tower roof rack installed you can use their lock core kit # Y07204. This set includes 4 lock cores, two standard keys and the control key you will use to install the cores in your BaseLine towers # Y28TR.
Please refer to the two linked videos for more on this kit and how to install it. view full answer...
The BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, # Y28TR, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, # Y06102, and the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, # Y00425, make up the roof rack system I recommend for your 2017 Ford Edge with no existing rails or crossbars.
According to the Ford owners manual for this vehicle, this rack is limited to the factory specs for load capacity of 45 kg or 99.2 lbs.
I've attached view full answer...
I have a kit that would be perfect for your set up. I would get the BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06152 to get the feet attached to your roof. Then you will need the RoundBar SL Adapter # Y03536 to get your round Yakima Roof Bars secured to your roof rack foot packs.
This kit will look and work the best on the roof of your 2021 Honda Passport since you already have round Yakima roof bars. view full answer...
We checked with Yakima and their Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06102, and # Y06139 is a confirmed fit for your 2016 Ford Edge with the panoramic roof. This would be a great option that would fit perfectly so we highly recommend it. view full answer...
In order to mount a set of Yakima Round Bars onto a 2017 Toyota Tacoma, you'll need the following clips and tower pieces:
BaseLine Towers for Yakima Crossbars - Naked Roofs, part # Y28TR
RoundBar SL Adapter for Yakima BaseLine Towers - part # Y03536
2x Base Clip Fit Kit for Yakima BaseLine Roof Rack Towers Qty 2- Part # Y06145
Note that you will need TWO (2) of the Clip Fit Kit, part # Y06145 in order to complete this installation.
I've included a video of this installation view full answer...
I do have an option for you but I don't have any way for you to use your old Q-Towers on your new 2018 Volkswagen Golf GTI because the clips are just not available. The best option you have to reuse some of the components you have now is to purchase new clips part # Y06123 for the front and part # Y06125 for the rear, new feet part # Y28TR, and the adapter part # Y03536.
I am not sure what you are asking in regards to Thule but most of their accessories will work with the Yakima round view full answer...
The Yakima BaseClip Fit Kit # Y06123 is for the front and the Yakima BaseClip Fit Kit # Y06170 is for the rear. Then you can install your Yakima BaseLine Towers Y00146 and then whatever Yakima crossbars you have. view full answer...
If you are referring to the Yakima Round Bar Roof Rack then yes, you can transfer it from the 2005 Toyota Prius to your 2017 Toyota Prius Prime but you will need a new fit kit as they are different for each vehicle. The fit kit is the part or rather clips that attach inside the door jamb and secure the feet to the roof. Therefore, the only things you will need to reuse your Yakima Round Bar Roof Rack is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06123 and part # Y06169.
Please view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.