Discover Valcrum - Parts & Accessories for Your Journey

Hello Curtis, thanks for reaching out. We do carry some screw on oil bath caps, but nothing in the size you mentioned. The closest we have would be the Oil Cap #RG04-260 which is a 2.563" ID. From there the next closest thing would be a…

Hey Eric, so we do have what you need with the replacement cap part #VA55JR but the one you mentioned is smaller so it would not work for you. The cap you need is 4 inch diameter and the one you referenced is 3.75 inch.

Hey Bill, thanks for reaching out. I just went out to our warehouse and measured the Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack #e63VV. The outer tube is 4-1/2" square. The inner tube with the foot is 4".

Hello P.S. I'm glad you reached out because this is a great question! This year, new regulations changed the refrigerants used in RV air conditioners, switching from R-410A to R-32. This is a win all around as it is better for the environment and…

Hello Jason, thanks for reaching out. An Equal-i-zer Weight Distribution System is what I recommend for that since they are surge brake compatible. If you can tell me the GVWR or tongue weight of your camper I can recommend the correct WD hitch.…

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

Hey James, We don't currently offer much for Schwintek systems, but I'd be happy to get the part added if you can give me a bit more information on your current system. Are you referring to the torque shaft that connects to the motor or the…

Looks like you have a service body truck/van based on your pictures. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

Thank you for the photos, they were very helpful; we do have replacements for the AL-KO 8490 hubs with a 6 on 5-1/2 bolt pattern you have, though to make sure you get the correct replacement you need to take apart your hub assembly and look at the…

I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest…

Hey Jude, You can definitely replace the Kodiak brakes you have on your trailer with DeeMaxx as long as they are the same size and rating. From everything you mentioned the DeeMaxx #DE49YR is going to be a good replacement. It is the same bolt…

You can put a maintenance charge on your trailer battery with the 12 volt accessory circuit of the 7-way. The 1:00 position of your 7-way carries this circuit. You would just need to run a length of 10 gauge wire like part #10-1-1 (sold by the foot),…