Replace the oil/grease cap, O-ring, and plug on your AL-KO, Dexter, or Rockwell axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. Easy access side port lets you add or drain lube without removing cap.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap for the 9,000 pound to 16,000 pound axles. Now this part here replaces the oil bath or the grease cap, the O ring, and the plug on these axles. It works on the Alko, the Hayes, the QRG, or the Rockwell 9,000 to 16,000 pound axles manufactured after 1996. This part will include the cap, the watertight O ring seal right here, and then the magnetic vent plug.
It is a direct replacement for the Alko, Dexter, Hayes, or Rockwell oil caps. The Alko it number works on is 1531029. The Dexter part number is K71-859-0. The Hayes number is K568220, and the Rockwell part number is 12011-1. This cap will function as either an oil bath or a grease cap.
We mentioned the plug here. It is a magnetic vent plug. And if I switch it and I flip it over, you'll be able to see, right in the very middle is a rare earth magnet. This will attract damaging metal particles, helps identify problems before they become critical. The body on this is an aluminum alloy body.
Has a nice black e-coat finish on it to resist corrosion. The lens right up here is a clear viewing lens. This will let you quickly check your oil level. And the port right over here, it's a very easy to access side port that'll let you fill or drain your lubricant without removing the cap. The O ring and then the gasket around the plate right up here will provide a nice tight seal.
It is a threaded cap, which installs easily. And the dimension of the thread outer diameter is 3.75 inches. But that should do it for the review on this Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap for the 9,000 pound to 16,000 pound axles.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
Replace the oil/grease cap, O-ring, and plug on your AL-KO, Dexter, or Rockwell axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. Easy access side port lets you add or drain lube without removing cap.Great doing business! Exactly what I ne eded
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.