Filter by Part Style

$339.23 - $1,051.86

$23.16 - $23.16

$3.13 - $3.13

$134.69 - $489.90

$14.99 - $14.99

$322.72 - $438.68

$79.20 - $111.30

$31.80 - $47.76

$82.71 - $134.37

$25.36 - $25.36

$176.41 - $1,613.49

$1,067.48 - $1,355.28

$404.32 - $728.63

$221.71 - $728.63

$141.62 - $141.62

$46.46 - $50.45

$23.22 - $23.22

$31.38 - $154.27

$142.99 - $142.99

$4.31 - $4.31

$3.13 - $3.13

$28.44 - $106.98
Videos
for rv slide out parts
Help Articles
for rv slide out parts
Expert Answers
for rv slide out parts
Hey Jim. You can email whatever pictures you'd like me to look at directly to the email address you receive this response from. We do have a couple of wiper seals that are close to the measurements you have described. I've listed them below:…
view full answer...Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…
view full answer......The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, # LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side...
view full answer...Hey Eric, thanks for the information! Your older GE ARC13AACBL2 with 410a refrigerant is not going to be compatible with any AC components that came out this year. Everything has the new R32 refrigerant now so it's made all the 410a systems and…
view full answer...Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…
view full answer...Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…
view full answer......Yes, if you just need the motor from the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor # LC119128 then you'll need to get the following: - Replacement 18:1 High Speed Motor...
view full answer...Hey Brad, thanks for reaching out! What are the dimensions of your tail lights? The numbers and letters you gave me have to do with the testing that the lights have undergone as opposed to a part number. Let me know what measurements you find!
view full answer...The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.
view full answer...The Fixed Dual Rack Repair Kit #LC84FR goes on the left side of the slide as you look at the slide out from the outside of the camper. So on the drivers side it will be the front of the slide. The Floating Dual Rack Repair Kit #LC26VR is going to be…
view full answer......electric through-frame slide out, and it measured 24" long, then you could use the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor # LC119128. The replacement slide out parts listed...
view full answer...Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…
view full answer...Videos
for rv slide out parts
Help Articles
for rv slide out parts
Expert Answers
for rv slide out parts
Hey Jim. You can email whatever pictures you'd like me to look at directly to the email address you receive this response from. We do have a couple of wiper seals that are close to the measurements you have described. I've listed them below:…
view full answer...Harvey, you’re right on target asking about sizing. The AFMD35121 was a 35k BTU unit that’s been discontinued. You can step into the 35K BTU #DMC74MR furnace by Dometic, but it is 2 inches taller than your current one. Most folks just enlarge the…
view full answer......The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, # LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side...
view full answer...Hey Eric, thanks for the information! Your older GE ARC13AACBL2 with 410a refrigerant is not going to be compatible with any AC components that came out this year. Everything has the new R32 refrigerant now so it's made all the 410a systems and…
view full answer...Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…
view full answer...Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…
view full answer......Yes, if you just need the motor from the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor # LC119128 then you'll need to get the following: - Replacement 18:1 High Speed Motor...
view full answer...Hey Brad, thanks for reaching out! What are the dimensions of your tail lights? The numbers and letters you gave me have to do with the testing that the lights have undergone as opposed to a part number. Let me know what measurements you find!
view full answer...The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.
view full answer...The Fixed Dual Rack Repair Kit #LC84FR goes on the left side of the slide as you look at the slide out from the outside of the camper. So on the drivers side it will be the front of the slide. The Floating Dual Rack Repair Kit #LC26VR is going to be…
view full answer......electric through-frame slide out, and it measured 24" long, then you could use the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor # LC119128. The replacement slide out parts listed...
view full answer...Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…
view full answer...Filters
- 105 results
Filter Results
Actuator
$339.23 - $1,051.86
Bearing
$23.16 - $23.16
Bulb Seal
$3.13 - $3.13
Controller
$134.69 - $489.90
Crown Gear
$14.99 - $14.99
Cylinder
$322.72 - $438.68
Drop Head
$79.20 - $111.30
Flexguard
$31.80 - $47.76
Gear Pack
$82.71 - $134.37
Hex Gear
$25.36 - $25.36
Motor
$176.41 - $1,613.49
Power Unit
$1,067.48 - $1,355.28
Rack Repair Kit
$404.32 - $728.63
Roller
$221.71 - $728.63
Solenoid
$141.62 - $141.62
Spur Gear
$46.46 - $50.45
Stop Can
$23.22 - $23.22
Switch
$31.38 - $154.27
Valve
$142.99 - $142.99
Wear Pad
$4.31 - $4.31
Wiper Seal
$3.13 - $3.13
Wiring Harness
$28.44 - $106.98