bing tracking image
  1. RV Slide Out Parts
  2. Lippert
  3. Flexguard
  4. Hardware
Lippert Double Flexguard RV Slide-Out Kit Hardware

Lippert Double Flexguard RV Slide-Out Kit Hardware

Item # LC1346281
lowest price pledge
Our Price: $34.83
You Save: 11%
RV Slide Out Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.59 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Lowest Prices for the best rv slide out parts from Lippert. Lippert Double Flexguard RV Slide-Out Kit Hardware part number LC1346281 can be ordered online at or call 800-298-1624 for expert service.
  • All Info
  • Reviews (87)
  • Q & A (0)
  • Videos (3)
  • Photos
  • Why etrailer?

Lippert RV Slide Out Parts - LC1346281

  • Flexguard
  • Hardware
  • Lippert

  • LCI's patented Flex Guard system utilizes a heavy-duty flexible rail, which offers support and protection to vital slide-out plumbing, wiring and hoses under the slide room floor. The Flex Guard smoothly straightens during extension and safely bends in an arc as it contracts. This unique design prevents sagging during slide-out operation as well as the unnatural bends and stresses that can lead to breakage.
  • Protects slide-out plumbing, wiring and hoses during extension and retraction of slide room
  • Can be installed on any slide-out system that uses a 1/4-inch steel rod or swing arm for the same application
  • Double Application
  • All kits come with 8" mounting post with washer and five Flex Guard clips
  • Made in the USA
  • 1-Year limited warranty


Video of Lippert Double Flexguard RV Slide-Out Kit Hardware

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Lippert Double Flexguard RV Slide-Out Kit Hardware Review

Hola neighbors. It's Brad here at etrailer. And today we're taking a look at installing the Lippert flex guard. And this is gonna be for your camper slide-out making sure that you keep your wires protected and not kinking, when opening and closing. Now, this is available in three different options. You have a single hole, a double hole, as you see here, and also a triple.

And that way you can make it fit to your configuration. This heavy duty flexible rail is gonna keep all your wires and plumbing in place when your camper slide-out goes in and out. And basically, that's gonna keep it from pinching any wires or having these catch on anything. It really just keeps these in place, nice and secure. But it still allows them to flex as it goes back and forth.

Now, many campers have these installed from the factory and over time as you use it, and it's exposed to elements, these can get a little bit brittle and break. Well, not to worry. You can replace it. And also if you have a camper and you go, "Hey! I could maybe use that. Some of my lighters hang down." You can add it to pretty much any of them as it's a universal fit.

It's pretty easy installation and all the hardware is included. Now, this works with electrical wires as well as flexible plumbing. So, anything that you have running out on your slide that you're worried about pinching or kinking up, this is gonna fix that. So, as you can see, as the slide goes in, this is gonna just keep those cables nice and in place. And that way they're not kinking or binding up, or catching on anything else on the slide.

So, nice peace of mind, knowing that you can slide your camper out. And no problem with no damage to any of your plumbing or your electrical. So, as you can see, it went in smoothly when we retracted our slide. Now, it goes just as easy on the way out. Now, as far as the installation, it's pretty simple. You can replace your existing one or if you're adding a new one, that's also very easy. So, let's take a look at that. So you can see, this is the one that is on the camper currently. And this being cracked really gains us nothing. This wire can easily crunch back up and it doesn't really have that protection anymore. It's nice that it's still in the slots to kind of keep it from dragging or catching. But overall, obviously you can see this as dragging. So to replace this, it's pretty easy and you can actually re-use a lot of the hardware that's installed. In fact, you can reuse the screws and we have our mount bracket there. As the kit comes with the new one, I really don't have to replace it. It's pretty simple. So, here we have our existing mount bracket and it's pretty simple. Nothing's bent, nothing's damaged. If you wanna replace this when you're putting your new guard on, you can totally do that. But I think ours is working pretty fine. It's just self caps in there with some screws. So, if you wanna put new ones on, you do have the hardware in the kit as well. So, in order to get this off though, you're gonna see this little spacer here or this washer, just kind of holds it in place. And this one has obviously seen better days. So, we'll just go ahead and I can pull this off by hand or even a pair of pliers might work well. But once that's off, this may work down just a little bit and that will slide off pretty easy. Now, to save us having to unattach our wires here and spool them through these brackets. All of these are actually perfectly fine. There's nothing actually broken on 'em. So, it's gonna be a lot easier to just simply slide these off. And it's gonna keep the wires intact. Now, if you're putting this on and this isn't already installed, you're gonna have to detach your wires, route these through. It's not too big of a deal but to save you a little bit of time, if this is the piece that's broken, which, that's gonna see a lot of the flex, so chances are, if you're replacing it, it probably is just this piece. So now, I'm gonna slide these off. And they come off pretty easy here. The only thing holding it, you can see, there's these three screws here. I'm just gonnao go ahead and take these out. Okay. With these screws out, this is just gonna pop off here. Now we can grab our new one. So, now I have my new piece. You can see it's kind of, it's definitely formed to want to contract. So, with this, pretty much all I'm gonna do, make sure that I have this kind of lined up how I want it. And I'm just gonna slide these through and it's gonna be that simple. It's gonna be that simple as well for the single, the double and the triple. Now, if you do wanna replace these, if some of them have broken, you are gonna have to detach your wires in order to get these slid on. Now, if you're able to reuse these, I do suggest that, just to make it a little bit easier. Otherwise you are gonna have to detach your wires. This one feeds into a junction box. This one has wire nuts. But this one, to detach that might get a little tricky. So, if you wanna go that route, by all means, you can do that. But we're gonna simply just reuse our old ones here. And to make it pretty easy, I, kind of, have this coiled around my torso here just kind of, hold it in place. And then, I'm just gonna slip these on, one at a time. And then once they're on there, we can space them out a little more. So, I have these kind of rammed on our little plastic slide here. I'm just gonna reuse these same holes here and use the same screws. Now again, there are self-tapping screws that are included in the kit and you can, by all means, go ahead and recap some holes in there and get 'em in place. But this should work pretty well for us right here. I'm going ahead and actually use some self-tappers just to give it an extra hold. Before we had three. Now we have four and it's gonna hold on there nice and tight. So, now we're going to uncoil this, and this is going to simply slide up on the shaft here that we previously pulled it off from. Now, we're simply going to slide this on. And then, once it's all the way up, we have this little washer here that has teeth and that, once you slide it up is going to bite into the middle a little bit and it's gonna keep it in place. Now it does take a little bit of force here. But the reason that force is there, is to make sure that doesn't slide down. So now, this new one's in place, it's flexible again. And I'm just simply going to take these little brackets here and slide them out. And that way, the wires are actually following it. Now, if your slide doesn't go out as far as this one, it's actually kind of nice here. There's a whole another set of holes about a foot back. And that way you can space that out to custom fit to yours. So, now with everything in place, let's go ahead and test it out. And that was the look and installation of the Lippert flex guard for your camper slide-out. Thanks for watching..

Customer Reviews

Lippert Double Flexguard RV Slide-Out Kit Hardware - LC1346281

Average Customer Rating:  4.6 out of 5 stars   (87 Customer Reviews)

- LC1346281


The flex guard will slide through the longer thin hole on the brackets. Please see this expert answer for the full installation:
-- Etrailer Expert Sierra K - 10/13/2021

- LC1346281

This product replaced the original equipment part underneath the trailer slide out. The part supports the wiring to the slide out to avoid the wiring draping over the trailer tires. Second, the factory installed the original part backwards and the support band rested closed about an inch above the tires...causing it to be damaged from road vibrations against the tires. The original part eventually broke and I pop riveted the ends to a three inch door hinge as a quick repair. The replacement part was easy to install in the correct direction and worked well. The support band closed well behind the tires and away from additional damage.

- LC1346281

Good product, works as designed, delivered on time as estimated

- LC1346281

Replaced on a 2015 model Open Range 5th Wheel. The original broke. I rate it average due to the fact it the design itself is flawed. That could be partly OR's fault, but nonetheless, the detractors from a 5 star rating are: 1. It sags just like the old one. The OR design uses two posts vs fastening one end to the body, and the best you can do is zip tie the flat end to the second post. It's how the original was done. 2. The only way to use the sliding cable guides as-is is to either disconnect the cable assemblies at one end (big job) or the other to thread them through the holes, or cut the holes to allow the cable to be slipped through the gap, and zip tie for extra support. A better design would allow the cables to be secured without cutting. I don't expect this one to last more than 3 years, and will likely seek a redesign before that happens. As far as the delivery from etrailer, the economy shipping was faster than I expected. The negatives expressed here are all directed at Lippert and do hope they're reading this........

- LC1346281

On time delivery and great product and good people to deal with.

- LC1346281

came to us in good time. exactly what we needed!

- LC1346281

Replaces cable guide on curbside slide out that has cracked. Reused most of the old hardware since I was just replacing broken piece. Swap out was easy and not per instructions. I just undid the bolts holding the guides and slipped the old hose/Cable holders into new guide and was done. I wish the part was about 2" longer to allow for a little extra when slide is out. There is no extra, strap is at max length.

Still works like it is supposed to
Phil S - 07/13/2017

- LC1346281

worked very well, better then factory o riginal.

- LC1346281

this is a replacement happy to find it a e-trailer

- LC1346281

Exact replacements for my camper slide out. Easy to find on the web site.

- LC1346281

Good replacement for broken strap. Slid on existing wire holders. Had to drill out one hole in the new strap that did not match up. Quick installation.

- LC1346281

Service was great. received my product earlier than expected. have not had a chance to install product yet; but, it looks like the oem part. Follow up was great. will advise at a later date how product worked

Awwww. Disappointed because the black plastic where it bends immediately broke after first use. Im back to square one. In addition i couldnt figure out how to disconnect the wires for the slide out to this new product through the wires. I had to use gorilla tape to hold everything in place.??
Ronnie - 11/04/2018

- LC1346281

As always product was a direct replacement for my broken cable holder. I got it really fast and read t go.

- LC1346281

same as always this company never fails to please me great delivery and great product.

- LC1346281

Was an exact replacement for my broken cable support. Easy to replace the old one.

- LC1346281

Quick and exact. Thanks.

- LC1346281

Fast shipping. Thank you and we will be doing business in the future.

- LC1346281

Great service, great product! Happy Cu stomer

- LC1346281

I appreciate the fast delivery and exactly what I wanted. Thanks

- LC1346281

Product received was exactly what I ord ered.

- LC1346281

Just as described. Great service, great product.

- LC1346281

the flex guard is just what I wanted and the the delivery was great !

- LC1346281

fast delivery and great product

- LC1346281

- LC1346281

Just receive the part fast

Show More Reviews

Ask the Experts about this Lippert RV Slide Out Parts

Do you have a question about this RV Slide Out Part?

  • Why

    At we guarantee:
  • Highest quality rv slide out parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv slide out part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Chelsea B
Written by:
Chelsea B
Employee Mike S
Updated by:
Mike S
Employee Bradley B
Test Fit:
Bradley B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.