Lippert Ground Control 3.0 Electric Leveling System Replacement Control Module Review Video

The correct replacement module for the 694654 that you have now is the part #LC85ED.

Hey Joey, The Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED has a 1-year manufacturer warranty.

I reached out to Lippert and your 346005 control module was replaced with the Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED. To use this control module they said you must have the Control Panel #LC421484 otherwise…

Yes, the Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED will work as a replacement, however according to Lippert you need to have the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV…

We have heard of this issue before on the Lippert Ground Control systems #LC358590. Here is the recommended procedure for clearing the error code: Extend all jacks at least 6 inches. Then press and hold the RETRACT button until the jacks begin…

The "external sensor" error you're getting on the display of your Lippert leveling system like the Ground Control #LC358590 indicates an issue with the rear leveling sensor. This particular sensor should be located a few feet behind the…

I was not able to locate anything using the 22284 you mentioned. But the 694654 came back to Lippert part number 803279 which is our Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED. Given this information, the…

When your Lippert Ground Control 3.0 #LC358590 has a reading that says "Comm Error" it is referring to the communication between the controller and touch pad. You will need to check your harness to ensure it is connected properly and there…

The LR jack code means your left rear jack leg is not able to be controlled by the computer of the Ground Control 3.0 basically. This can be a hall signal issue (open ground/short, or other malfunction) or an unexpected high amperage current stall…

I spoke with my contact at Lippert and this is what they sent me about the external sensor issue you have: External sensor error means there is an issue with the rear leveling sensor. This will be located 2-3 foot behind the rearmost axle. There may…

The Comm Error code is saying that the communication between controller and touch pad has been lost. I have included a diagram of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817. This will help you check the connections…

I reached out to Lippert and your 346005 control module was replaced with the Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED. To use this control module they said you must have the Control Panel #LC421484 otherwise…