I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…
Hey Wayne! Our etrailer Sidewind Aluminum Trailer Jack w/ Wheel #e95YV would be a great option for your Karavan Classic trailer. I found online that the 17 ft 1997 Boston Whaler Montauk comes in at around 950 lbs, so the #e95YV's 1,500 lbs…
We currently will not have a kit that contains everything that you are looking for but we do have all the parts you will need. First I recommend upgrading your equalizers to the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR. These…
I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…
The correct Draw-Tite Trailer Hitch for your 2013 Porsche Cayenne is the Draw-Tite #75950 and is a great cost effective option that fits nearly the same as the Curt Trailer Hitch #C13116 you mentioned. Between these two hitches I would go with…
Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…
I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…
Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…
Hey Jerry! The TorkLift Tie-Downs like the #TL83DR you were looking at are a custom fit so you won't have to drill into your frame. These are the Talon, which is the upgraded aluminum version, and will fit your Ram assuming you have no running…
Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…
Hey Mike! The Curt #C59496 is a universal splice-in wiring harness. The Curt T-Connector Vehicle Wiring Harness #C56403 is a custom wiring harness so it plugs into the connection points at the rear without any need for splicing. Since the custom…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Hitch Step with 400 lbs capacity
Step up with confidence and a solid, heavy-duty feel. A hitch step rated for 400 lbs gives sturdy footing for loading gear or reaching the roof without wobble. It's a simple hitch-mounted boost that makes daily climbs quicker and steadier.
Heavy duty construction helps the step feel solid and dependable. A well-built step can reduce flex and give you a confident footing. Check that the step's build matches how you plan to use it.
Confirm the step's construction meets your needs and that it works great in your setup. Make sure it's mounted as intended and feels stable before putting your full weight on it. If anything feels loose, recheck the connection points.
A heavy-duty hitch step is a solid choice for regular climbing in and out because it works great and has heavy duty construction. Look for sturdy build quality you can trust underfoot. If you expect frequent use, choose the toughest construction available for durability.
Filters
