Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…
I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…
Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…
Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…
Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…
Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…
Hey David! The length of the tangs on the 2-Tang Clevis Attachment #BW54KR is 5.19". The distance between the tangs is 2" and the hole diameter is 1.11".
Hey Rob, I’d be wondering the same thing if I came across a ball mount made out of aluminum like the #BPH77MR while researching. Totally fair question. That said, I haven’t seen any noticeable difference in slop or wear compared to their steel…
I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…
Hey Mike! The Curt #C59496 is a universal splice-in wiring harness. The Curt T-Connector Vehicle Wiring Harness #C56403 is a custom wiring harness so it plugs into the connection points at the rear without any need for splicing. Since the custom…
Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…
Hi Raymond! I have a couple options you may be interested in, but that's quite a conundrum. I do know there are no 4 bike racks that can hold a spare tire as well as the bikes, but you may be able to use a cargo carrier, like the 24x60 etrailer…
Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…
I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…
Hello Morgan, Great question! The etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs #e78FV is going to be a great fit for your 2026 Ram 2500 whether it has a 6 1/2' bed (without Rambox) or an 8' bed. With the etrailer Over-The-Cab…
Hey Jeff, great question! Choose the 2,000 lb model if you tow larger travel trailers, enclosed trailers, dump trailers, equipment trailers, or other heavy-duty trailers with tongue weights that could exceed 1,000 lbs. It works for lighter trailers…
Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…
Hey Connor! Yes, the Curt Dual Ball Attachment for Weight Distribution Shanks #C69NR will work with an Equal-i-zer shank. This fits standard WDH shanks with 2-1/2" hole spacing. The #EQ90-02-4500 has 1-1/4" spacing, so every two holes is…
Hey David! The length of the tangs on the 2-Tang Clevis Attachment #BW54KR is 5.19". The distance between the tangs is 2" and the hole diameter is 1.11".
Hey Rob, I’d be wondering the same thing if I came across a ball mount made out of aluminum like the #BPH77MR while researching. Totally fair question. That said, I haven’t seen any noticeable difference in slop or wear compared to their steel…
I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…
Hey Mike! The Curt #C59496 is a universal splice-in wiring harness. The Curt T-Connector Vehicle Wiring Harness #C56403 is a custom wiring harness so it plugs into the connection points at the rear without any need for splicing. Since the custom…
Hi Eric! The Dylux RV Tankless Water Heater #DY54FR does have auto frost protection, which activates when the temperature drops below close to freezing temps. That’s a helpful feature for chilly nights while the RV is in use. I would not treat that…
Hi Raymond! I have a couple options you may be interested in, but that's quite a conundrum. I do know there are no 4 bike racks that can hold a spare tire as well as the bikes, but you may be able to use a cargo carrier, like the 24x60 etrailer…
Make climbing into truck beds, campers, and cargo areas simpler with a hitch step that mounts to your receiver. Match it to your hitch size—standard receiver styles are common, and some steps pair with adjustable channel mounts—then choose the platform size you prefer, from compact single steps to wider designs. For a more solid feel, consider anti-rattle hardware and confirm your hitch pin or lock setup.
Match the step to your receiver size, commonly 2". Decide if you want a fold-up step to reduce shin bumps or a fixed platform for constant access. If you use a front receiver, a sturdy platform helps you reach the engine bay. Check if a hitch pin or lock is included; some steps require these separately.
Use an anti-rattle hitch pin or a stabilizer to help remove wiggle. Some steps secure with a bolt that tightens against the receiver for a more solid feel. If your step includes an anti-rattle bracket bolt, avoid over-tightening; just a bit past finger tight helps prevent bending parts.
Choose a platform size that matches your footing or your dog's stride. Larger platforms or multi-step designs make it feel more like stairs and can be easier for bigger dogs or higher cargo areas. If a single, small step felt too tight before, size up for confidence and traction.
It should not in most cases because the step typically doesn't stick out far enough. After install, put the vehicle in reverse and verify your camera view and sensors. If you see false alerts, a fold-up step can help minimize what's in the sensor's field when not in use.
Filters
