Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Hey Jeff, I don't see why you could use the Roadmaster diode part #RM-790 the way you mentioned. Sounds like you are looking for a way to have aux lights come on with either a remote switch from your cab or to come on anytime the high beams are…
Hi Sen; that is correct, none of our replacement hub and drum assemblies like the Dexter #84546UC3-EZ you looked at have a hole in them for brake adjustment. The brakes will need to be adjusted on the back side of the brake assemblies through that…
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey Randy, I wish we had the replacement flush ball you are looking for but at this time Dometic does not offer that as a replacement part. Only solution would be a new 310 like the part #DOM57FR.
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Hey Jeff, I don't see why you could use the Roadmaster diode part #RM-790 the way you mentioned. Sounds like you are looking for a way to have aux lights come on with either a remote switch from your cab or to come on anytime the high beams are…
Hi Sen; that is correct, none of our replacement hub and drum assemblies like the Dexter #84546UC3-EZ you looked at have a hole in them for brake adjustment. The brakes will need to be adjusted on the back side of the brake assemblies through that…
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey Randy, I wish we had the replacement flush ball you are looking for but at this time Dometic does not offer that as a replacement part. Only solution would be a new 310 like the part #DOM57FR.
Illuminate Your Adventures with Optronics Work Lights
Optronics work lights are a top choice for enthusiasts seeking reliable, bright, and versatile lighting solutions. Perfect for trailers, trucks, and more, these lights offer easy installation and durable performance, making them ideal for various applications.
Optronics work lights excel in various settings, from trailers to trucks. They're praised for their brightness and ease of installation, making them a versatile choice for enhancing visibility in multiple scenarios, whether you're reversing a trailer or lighting up a workspace.
Optronics lights are generally durable, with many finding them reliable over time. While some have experienced issues with LED longevity, most appreciate their robust build and effective heat dissipation, ensuring they withstand regular use in demanding environments.
Optronics lights offer great value by balancing cost and performance. They provide bright illumination comparable to more expensive brands, making them a smart choice for those seeking quality without breaking the bank. Their included installation hardware adds to their appeal.
Installation of Optronics work lights is straightforward, often described as a simple plug-and-play process. Many appreciate the included hardware and clear instructions, which make it easy to replace existing lights or add new ones to various vehicles and setups.
Yes, Optronics work lights are versatile and can be used on a range of vehicles, including trailers, trucks, and even boats. Their adaptability and bright output make them suitable for enhancing visibility in diverse applications, from reversing to illuminating work areas.
Filters
